Alright yea i know this is most likely the 5 millions time someones ask this but what tie size should i go for i have the Drop Shackles in the rear and the t-bar crank in the front...I have Stock 16's what size tire should i go for 32's would that still allow a good deal of flex with out rubbing? And wheres a good site to get tires at i normally go to Tirerack.com.

Thanks

 

265/75r16. Its a 32, your truck will like it

 

A 32x11.50x16 would be a little bigger and actually a 32" tire. A 265 is just over a 31 1/2 tire, not much smaller...

 

Well i found tires on tirerack.com for the 265's where's another good place to buy tires online?

 

what are u looking for all terrains or mud terrains. im going through the same thing. i found dakota at's (coops verson of bfg all terrain) same tread pattern for $116 265/75/75. I think the mud terrain was i believe $130..

Im from pittsburgh also. check your pm's

 

i wasnt aware that they made 32x11.50x16, i thought 16 inch rims only had the p metric size tires

 

Alright os i figure i'm gonna by around 32's but my one question is sense my trucks an auto is that gonna screw with my tranny?

 

I went from stock 245s to 33x12.5 and everything fine.

 

No it won't mess w/the tranny. With the crank and shackles 265's will look good. Tire rack is a good place also try your local discount tire store.

 

You can go up to a 285 if you really wanted to, its all in what your going to do...wheel, or just use it as a DD....


Wheel = 265's No Rubbing
DD = 285's Very minor rub @ full lock

 

I got my tires from 4wheelparts.com. Great price and I didn't have any shipping when I bought the either.