Doing a 3" PA lift on my 2010 4x4
I'm going to be lifting my 2010 tomorrow with the PA 3" bl. Any last minute pointers anyone can think of? I've read through the the tech info extravaganza as well.
I have a MAP torch for the body bolts for the loctite, jack and axle stands, ratchet set and air tools, every wrench under the sun, your normal tools. Have a guy coming to help me (I'm in Oakville ON) as well and he's done a couple lifts so we should be good to go! I've also been spraying the body bolts with WD-40 or Jigaloo every couple days for the past few weeks.
I bought some step guard from home depot to MacGyver some rear gap guards as well.
--2010 4.0L V6 SOHC Ranger Sport 4x4--
Kenwood KDC-X794 deck, 4 x Alpine SPS Type 'S' speakers, Alpine MRP-M500 amp with 10" Kicker 400rms sub. Fatmat Sound Deadner. OHC Mod. Intake-Silencer mod. 31x10.5R15 BFG All-Terrain T/A KO's on 15" Eagle Series 185's. Pre-key'ed with T-bar crank. Screamin' Demon Coil and Wires. K&N Drop-In. Magnaflow Off-road Pro Series.