Ford Ranger 3 inch body lift and 32's
#1
Ford Ranger 3 inch body lift and 32's
I just put new tires on my 2002 Ford ranger Edge 4x4. The bigger tires look good but rub when i turn too sharp. I wanted to see if anyone was running a 3 inch body lift with 32x11.50 and if they still rubbed. i would love to see some pics to get a feel for what it will look like before i do it. thanks. will post pics tomorrow
#2
#3
#5
#7
I didn't rub with stock wheels and 32" x 11.5" tires. Even in extreme off-road articulation there was no rub. I do have the Alcoa wheels but I don't think they have any different offset but I could be wrong. I have a 1.5" T-bar crank, maybe that helped.
When I switched to 33" x 10.5" tires, I did get some rub on the wheel well liners at near full turn. I bent the front mud flap brackets to get more clearance and the rub went away. I have not taken it off-road yet with the 33" tires but I am thinking I may need to do a 1/2" to 1" body lift to make sure it does not rub at full articulation while turning.
When I switched to 33" x 10.5" tires, I did get some rub on the wheel well liners at near full turn. I bent the front mud flap brackets to get more clearance and the rub went away. I have not taken it off-road yet with the 33" tires but I am thinking I may need to do a 1/2" to 1" body lift to make sure it does not rub at full articulation while turning.
Thread
Thread Starter
Forum
Replies
Last Post
ranger8x8
Suspension Tech
18
06-05-2011 07:14 PM
eBay / Craigslist Find: Ford 9 inch w/ 4.10s and TruTrax, Detroit Locker for Ford 9 inch
Masteratarms93
eBay & Craigslist Finds
1
11-25-2010 10:14 AM
04FX4LVL2
Snapshots
10
06-26-2009 01:57 AM