2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

dirty injectors (NEED HELP)

Thread Tools
 
Search this Thread
 
  #1  
Old 02-04-2008
03 EDGE's Avatar
Member
Thread Starter
Join Date: Feb 2008
Location: tampa fl
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
dirty injectors (NEED HELP)

i still have a miss in cylinder 4 and 6 and still idles rough and i belive it could be the injectors clogged has anyone had a problem with there injectors clogged abd if so what where the symptoms and how did you fix the problem...i have heard alot of this sea foam stuff and what is the best way to use it to clean the injectors and how affective is it?

p.s ive already checked the and changed the plugs and wires, checked the coil pack and changed the fuel filter and was a bit dirty in there that is why i belive it could be the injectors...any help is great thanx
 
  #2  
Old 02-04-2008
INT3RC3PTOR's Avatar
RF Veteran
iTrader: (4)
Join Date: Jul 2005
Location: Minnesooooota
Posts: 8,201
Likes: 0
Received 2 Likes on 2 Posts
im actually having this same problem with my 5.0 lately. im working on it tomarrow to figure it out but i think its either the injectors or maybe a bad plugs. but it has 2 new coilpacks and wires are brand new. and the ruff idle/hesitation used to only happen every once in a while but its now happening alot. so im slighty lost but im hoping to figure it out at my buddys shop tomarrow
 
  #3  
Old 02-05-2008
Hot Wheels's Avatar
Member
Join Date: Oct 2006
Location: Maple Plain, MN
Posts: 211
Likes: 0
Received 1 Like on 1 Post
When I had my misfires, I took it to our mechanic who had a cleaner that the public can't buy. Worked great on my working injectors, but my misfires were due to the coil on the injector failing and an injecter sticking closed. I replaced both myself, not that hard of a fix with a Haynes or Chilton manual, just a lot of time.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mr3kGT
2.9L & 3.0L V6 Tech
0
10-24-2013 09:40 PM
mossyoak03
Snapshots
22
07-21-2009 01:39 AM
02oregonedge+
4.0L OHV & SOHC V6 Tech
0
09-16-2008 06:53 PM
FiNkEy
2.9L & 3.0L V6 Tech
9
03-17-2008 05:34 PM
Kosmo04
Forced Induction & N20 Tech
11
12-08-2005 02:29 PM



Quick Reply: dirty injectors (NEED HELP)



All times are GMT -6. The time now is 12:42 PM.