3.0 misfire
#1
3.0 misfire
i have had my truck 2 years now i got about 179500 on it. i bought it everything was perfect. i got inspected and right when i left my rear drvier side shackle went like two mins after leaving inspection. then about a month later i got a misfire changed all the plugs wire and plugs. i put seafoam in it didnt work. i have had about 3 misfires now. they come and go. can anynoe help me out here please. i'm trying to get to the bottom of this. thanks mat
#2
Check the hose coming from the intake to the pcv valve.After you drive for a little while look to see if it is collapsing at the elbow part.
My truck has !72k on it and around 170k started running like crap.I changed plugs and stuff,was good for a day then back to crap.I noticed hose.Got new hose and pcv vale truck runs like new.
I also reccommend E3 plugs.Was long time autolite fan(all i ever used in the ranger)thought I would give something else a try;glad I did.Plugs are awesome.
My truck has !72k on it and around 170k started running like crap.I changed plugs and stuff,was good for a day then back to crap.I noticed hose.Got new hose and pcv vale truck runs like new.
I also reccommend E3 plugs.Was long time autolite fan(all i ever used in the ranger)thought I would give something else a try;glad I did.Plugs are awesome.
#3
Member
iTrader: (2)
Join Date: Jan 2010
Location: SFL
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Check the hose coming from the intake to the pcv valve.After you drive for a little while look to see if it is collapsing at the elbow part.
My truck has !72k on it and around 170k started running like crap.I changed plugs and stuff,was good for a day then back to crap.I noticed hose.Got new hose and pcv vale truck runs like new.
I also reccommend E3 plugs.Was long time autolite fan(all i ever used in the ranger)thought I would give something else a try;glad I did.Plugs are awesome.
My truck has !72k on it and around 170k started running like crap.I changed plugs and stuff,was good for a day then back to crap.I noticed hose.Got new hose and pcv vale truck runs like new.
I also reccommend E3 plugs.Was long time autolite fan(all i ever used in the ranger)thought I would give something else a try;glad I did.Plugs are awesome.
#6
i dont think its the pcv tho. i heard its a seal on one of the intake valves. but idk i need help lol. see i cahnge the plugs and wires and still runs the same like crap. idk one day i left it idling for about 2 hours and its cleared up. i havent done it yet but i will this weekend. and my buddy works at a shop has the top on the line snap on computer for check engine lights etc. and everytime it says cylinder 6 misfire feul injector failed.
#8
#13
#14
I was looking to see if anything was leaking and finding a way to figure out the misfire. and i was playing with the vaccum lines all of them have vaccum accept one. i'm wondering if that would have anything to do with the misfire. its the grreen line. and i'm going to play with it after work and see what is does. hopefully it fixs it
Thread
Thread Starter
Forum
Replies
Last Post