DOHC - 2.3L Duratec / Mazda L Engines Discussions and Topics specific to the Duratec 4 cylinder engines

O2 ranger p0171 and missing on all cyl.!!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 09-09-2010
joelmk3's Avatar
Member
Thread Starter
Join Date: Sep 2010
Location: Indianapolis IN
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
O2 ranger p0171 and missing on all cyl.!!!!

Hey guy i have an 02 ranger 2.3l 4 cylinder and it is throwing a p0171 (lean bank 1) p0301 p0302 p0303 p0304 (misfire on 1 2 3 4 cylinders) Now i have done some research on here already and heard about vacuum leak issues and have soaked the entire motor (vacuum lines included) in starting fluid and can find a leak!! i have also replaced the MAF and done a fuel pressure check (65 PSI) and i can not find the issue. So where do i go next? Maybe the MAP or BAP sensor? It has 170k miles just incase you guy need to know that. Thanks
 
  #2  
Old 09-09-2010
joelmk3's Avatar
Member
Thread Starter
Join Date: Sep 2010
Location: Indianapolis IN
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Anyone?
 
  #3  
Old 09-09-2010
ccosgrove71's Avatar
Member
Join Date: Jun 2010
Location: richmond,va
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
check you ECT sensor, and sounds like you may need a coil.
 
  #4  
Old 09-09-2010
joelmk3's Avatar
Member
Thread Starter
Join Date: Sep 2010
Location: Indianapolis IN
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ccosgrove71
check you ECT sensor, and sounds like you may need a coil.
That was my next step. Thanks for your input i will ohm out the coil tomorrow.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
geralddh15
2.9L & 3.0L V6 Tech
3
09-13-2022 11:53 AM
CadiLLacPimPin
Drivetrain Tech
15
08-14-2014 08:26 PM
sdogger56
DOHC - 2.3L Duratec / Mazda L Engines
5
11-10-2013 10:58 AM
dixie_boysles
SOHC - 2.3L & 2.5L Lima Engines
3
01-30-2010 06:20 PM
hz36t5
General Technical & Electrical
18
01-09-2008 05:44 AM



Quick Reply: O2 ranger p0171 and missing on all cyl.!!!!



All times are GMT -6. The time now is 07:30 AM.