1998 ranger 4r44e no reverse but reverse band not broken
#1
1998 ranger 4r44e no reverse but reverse band not broken
Searched for days on this and all im finding is the reverse band is broken,
what i have is a 98 3.0 rnager 4x4 4r44e 160k miles, the other day i put it in reverse as normal and it acted like it went to neutral, i have since changed the filter, and checked the reverse servo it wasnt broken or the oring werent damaged i put a screw driver through the hole and the reverse band had tension, i have talked to a few tranny shops they all want to do a complete rebuild if any of you all have had or heard of these symptoms please help the only other thing i noticed is the 4x4 lo and hi flash 5 times when u first start it but it has had manual hubs installed other than that not lights of any kind please help
what i have is a 98 3.0 rnager 4x4 4r44e 160k miles, the other day i put it in reverse as normal and it acted like it went to neutral, i have since changed the filter, and checked the reverse servo it wasnt broken or the oring werent damaged i put a screw driver through the hole and the reverse band had tension, i have talked to a few tranny shops they all want to do a complete rebuild if any of you all have had or heard of these symptoms please help the only other thing i noticed is the 4x4 lo and hi flash 5 times when u first start it but it has had manual hubs installed other than that not lights of any kind please help
#2
#3
yeah thats what the tranny shops are sayin, the only other thing i noticed i had dad put it in gear while the pan was off there was oil coming from the spring where the reverse solenoid attaches, i want some opinions should i jus let the shops do a rebuild some ppl say it may be the transfer case
Thread
Thread Starter
Forum
Replies
Last Post
Zinthar
Drivetrain Tech
0
06-17-2013 09:05 AM
ThomasHarlow
2.9L & 3.0L V6 Tech
0
05-25-2013 11:50 PM