help on manual t-case swap
#1
Join Date: Dec 2009
Location: kalamazoo, Michigan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
#3
I too have a thread on my manual case swap.. Look it up under my name... I just had to make my own linkage bracket since I don't have the tail housing bosses... But you do being you're an auto trans so it'll all bolt up easily...
What did you get the 1354m from? My thread tells you everything you need to know and change over if you're running an older ranger or expo 1354m. RangerEnvy is running a 1354m with the tulip style front output instead of the standard u-joint yoke front output like on the Expo and Ranger.
Let me know if you need anything else that's not in my thread.
What did you get the 1354m from? My thread tells you everything you need to know and change over if you're running an older ranger or expo 1354m. RangerEnvy is running a 1354m with the tulip style front output instead of the standard u-joint yoke front output like on the Expo and Ranger.
Let me know if you need anything else that's not in my thread.
Thread
Thread Starter
Forum
Replies
Last Post
04blackedge
OLD - Interior, Exterior, Electrical, & Misc.
1
05-07-2009 04:43 PM
Lefty04LevelII
Drivetrain Tech
5
11-16-2007 01:12 PM