2002 Shifter fit in a 92
#6
no the 3.0L if its the mazda trans is the same. let me psot pics hold on
:edit: the way the shifter mounts is turned i think 90deg from the newer one's otherwise i would already have a level II shifter in here
thus one below should be from looing from the back of the truck forward
this one below should be from the passanger side
HERE is a level II mounted on Silvertanks 4cyl i think 01 the screw nut as you see is east/west on the truck and mine is north/south if that makes sence
:edit: the way the shifter mounts is turned i think 90deg from the newer one's otherwise i would already have a level II shifter in here
thus one below should be from looing from the back of the truck forward
this one below should be from the passanger side
HERE is a level II mounted on Silvertanks 4cyl i think 01 the screw nut as you see is east/west on the truck and mine is north/south if that makes sence
Last edited by Redneckstone; 08-19-2005 at 09:49 AM.
#9
Thread
Thread Starter
Forum
Replies
Last Post
straightedge
Wheels & Tires Semi-Tech
20
09-30-2005 06:31 PM