Exterior Semi-Tech General discussion of exterior for the Ford Ranger.

Painting Faded Grill

Thread Tools
 
Search this Thread
 
  #1  
Old 05-08-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
Painting Faded Grill

Well, paid off the Ranger a while back, and thought that, as my first mod, I would paint the grill because it was a little faded. I had no idea as to just how faded it was until I took that sucker off!

Here it is, still on the truck:
Name:  100_2456.jpg
Views: 459
Size:  117.1 KB

and here's a close-up after I removed the Ford emblem. Really shows how faded it is:
Name:  100_2467.jpg
Views: 356
Size:  174.7 KB

so I go it cleaned up, and picked up some paint. Hope to get to it this weekend.
 
  #2  
Old 05-08-2009
ES894x4's Avatar
Member
Join Date: Jun 2007
Location: Killafornia
Posts: 1,523
Likes: 0
Received 1 Like on 1 Post
in to see the results
 
  #3  
Old 05-08-2009
RangerNDog's Avatar
Member
iTrader: (10)
Join Date: Aug 2008
Location: Harrisonburg, VA
Posts: 1,958
Likes: 0
Received 2 Likes on 2 Posts
What paint did you get? I painted mine about a week ago. I used Krylon Fusion Satin Black. Put on a few coats let it set for an hour and put it back on. Its holding up great and its already been through a few car washes.
 

Last edited by RangerNDog; 05-08-2009 at 02:05 PM. Reason: My spelling sucs
  #4  
Old 05-08-2009
The_Punisher's Avatar
Member
Join Date: Feb 2009
Location: Chino Hills, CA
Posts: 438
Likes: 0
Received 4 Likes on 2 Posts
good idea, i know it will turn out great
 
  #5  
Old 05-08-2009
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
I'll be hitting mine up with a fresh coat of Krylon Fusion Satin Black also.
 
  #6  
Old 05-08-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
I got the Krylon Fusion Satin Black as well. Searched the forums, and it seemed to be the overwhelming choice.
 
  #7  
Old 05-08-2009
rangerboy101's Avatar
RF Veteran
iTrader: (5)
Join Date: Aug 2007
Location: Winchester, Va
Posts: 8,187
Likes: 0
Received 1 Like on 1 Post
So when are you going to start painting cause you know that we're gonna need some pics of this.
 
  #8  
Old 05-08-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
I'm planning on starting tomorrow, weather permitting. I've been on vacation all week, and it's rained like crazy every day. If it rains, I may just pull the Merc into the driveway, and paint it in the garage, wife permitting.
 
  #9  
Old 05-09-2009
edgeman4.0's Avatar
Member
iTrader: (2)
Join Date: Oct 2008
Location: All Over
Posts: 1,475
Likes: 0
Received 0 Likes on 0 Posts
you'll love it when you get done. just make sure you spray it from every angle. that honeycomb is a pita. mine looked so much better after i did it. looked so good i continued to remove all the gray from my exterior with crylon fusion, bedrails, rear bumper cover. etc
 
  #10  
Old 05-09-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
OK, got it painted today. Used both cans of the Krylon. I think it turned out pretty good (especially for my first attempt at using spray paint). I got a little heavy handed a couple of places, but overall it turned out really good.

Here it is after a couple of coats:
Name:  100_2486.jpg
Views: 411
Size:  95.0 KB

And here it is after I finished.
Name:  100_2487.jpg
Views: 369
Size:  174.2 KB

I'll let it dry for a bit, get my lights wired, then get it back on and post some more photos.
 
  #11  
Old 05-09-2009
RangerNDog's Avatar
Member
iTrader: (10)
Join Date: Aug 2008
Location: Harrisonburg, VA
Posts: 1,958
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by mcpink
OK, got it painted today. Used both cans of the Krylon. I think it turned out pretty good (especially for my first attempt at using spray paint). I got a little heavy handed a couple of places, but overall it turned out really good.

Here it is after a couple of coats:


And here it is after I finished.


I'll let it dry for a bit, get my lights wired, then get it back on and post some more photos.
Looks much better. Give it about an hour to 1 1/2 and it should be good to put on.
 
  #12  
Old 05-09-2009
seed60's Avatar
RF Veteran
iTrader: (15)
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Likes: 0
Received 0 Likes on 0 Posts
Looks great. Give it plenty of time to cure. A rock chipped mine right after I put it on because I didn't give it enough time. Can't wait to see it on the truck.
 
  #13  
Old 05-09-2009
ES894x4's Avatar
Member
Join Date: Jun 2007
Location: Killafornia
Posts: 1,523
Likes: 0
Received 1 Like on 1 Post
lookin good
 
  #14  
Old 05-09-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
The waiting is the hardest part. Says it's chip proof in 7 days, but don't know if I can wait that long!
 
  #15  
Old 05-09-2009
TexasRanger's Avatar
Member
Join Date: Jun 2008
Location: austin, TX
Posts: 1,252
Likes: 0
Received 5 Likes on 3 Posts
i did mine this week :)

Name:  100_9048.jpg
Views: 389
Size:  134.1 KB

makes such a difference! i figured i was going to break it trying to get the mesh out so just taped it off. good job on your part! i also made my ford emblem black. get some pics of it on your truck!
 
  #16  
Old 05-09-2009
Ace's Avatar
Ace
Ace is offline
Member
iTrader: (4)
Join Date: Aug 2007
Location: Central, Illinois
Posts: 3,450
Likes: 0
Received 0 Likes on 0 Posts
this is the best thing i did to my truck
 
  #17  
Old 05-09-2009
RangerNDog's Avatar
Member
iTrader: (10)
Join Date: Aug 2008
Location: Harrisonburg, VA
Posts: 1,958
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by TexasRanger
i did mine this week :)



makes such a difference! i figured i was going to break it trying to get the mesh out so just taped it off. good job on your part! i also made my ford emblem black. get some pics of it on your truck!
I had to tape everything off too. I was too scared to break the grille to pull it apart.

Originally Posted by mcpink
The waiting is the hardest part. Says it's chip proof in 7 days, but don't know if I can wait that long!
I put mine on about an hour after I painted it and mine still looks like I just painted it.
 
  #18  
Old 05-09-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
There were a couple of times that it seemed like I was going to break it trying to pop it out of the surround, but I just slowed down, and worked it free. Glad I did, cause I suck at taping for paint.

I want to see your ford emblem painted black!
 
  #19  
Old 05-12-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
Got the lights wired up and aimed last night, then got the grill back on. Couldn't tell much in the dark, so I had to wait until this morning to take a good look at it. Looks pretty good so far, but I'll have to wait until the sun burns the fog off to get a really good look at it.

Here's a couple of crappy pics I took with my phone when I got to work this morning:
Name:  IMG00055.jpg
Views: 369
Size:  100.6 KB
Name:  IMG00056.jpg
Views: 405
Size:  92.8 KB
 
  #20  
Old 05-12-2009
mcpink's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Out There
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
Here are some better pics.

Name:  100_2489.jpg
Views: 787
Size:  139.8 KB
Name:  100_2490.jpg
Views: 395
Size:  103.2 KB
Name:  100_2491.jpg
Views: 392
Size:  157.9 KB
Name:  100_2492.jpg
Views: 343
Size:  204.4 KB
Name:  100_2495.jpg
Views: 354
Size:  175.7 KB
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MrDeeds
Exterior Semi-Tech
16
04-30-2012 10:09 AM
93MVSplash
Auto Detailing 101
3
08-26-2008 06:34 AM
Bhavesh
Exterior Semi-Tech
7
11-05-2006 02:44 PM
sniper_101
Auto Detailing 101
6
08-14-2006 05:22 PM
GregsEdge
General Ford Ranger Discussion
8
09-21-2005 08:40 PM



Quick Reply: Painting Faded Grill



All times are GMT -6. The time now is 09:15 PM.