like it says i got emolsiom 2.0 with 750lb eidech coils. Im jst trying to figure out how the coils mount on the shock... Maybe im retarded but im just at a lose, cant figure it out lol.... HELP ME!!!! lol Merry Christmas!!!

 

lucky dog

 

Nice.

 

take the fitting out and then the top lock ring unscrews, but thats just from looking at it

 

thats the fitting to charge it with nitrogen... idk if i take that out if the nitrogen will shoot out lol

 

Pirate4x4.com - The largest off roading website in the world.

 

sweet thanks man. i cant wait for these to go on the truck. btw is there a tool to tighten the adjuster to put more tension on the coils??

 

Spanner wrench.

 

does the bottom cup not have a notch to clear the shaft?

 

No, nitrogen won't come out just by taking the cap off. The cap keeps the schrader valve protected.

Screw off the adjustment and lock nut at the top of the coilover to install the spring. Once the spring is on, you adjust the nuts back down to compress the spring. It is best to use a spanner wrench, like this: Off Road Warehouse - ICON 2 Pin Spanner Wrench - ALL ICON Coil-over Shocks

 

SICK!

 

Just noticed, you got a sticker? I didn't get one.

 

did you check inside the manual?

 

yeah its a pretty cool sticker

 

The spanner wrench didnt come with the shocks?? Maybe its a wierd FOX thing but double check your boxes, they usually do

 

I did, but I'll double check just in case.

 

Fox shocks don't come with them.

 

gotcha

 

you know the bottom cup should come loose and come off the shaft. slide the coil on then put the bottom cup back in.

 

Thats a nice X-Mas present.

 

so how do i kno when the tensioners are tight enough????

 

Just depends on how you like it to ride. The tighter the coils, the stiffer the ride. You will be making adjustments for awhile after you install them. Its just a matter of fine tuning to your comfort level.

 

ah gotcha... thanks guys!!

 

You bought coils but you don't even know how to install the spring? Probably was not the right setup for you.

 

ive done my research... they are going on the truck when my buddy clears out his garage!