General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

How To: Disabling AdvanceTrac (2010+ models)

Thread Tools
 
Search this Thread
 
  #1  
Old 04-12-2010
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
How To: Disabling AdvanceTrac (2010+ models)

My roommate got a 2010 FX4 with the AdvanceTrac system (Traction control/Stability control) and the Only way to disable it is to press and hold the traction control button. If you press and let go, the TC will turn off and the icon will light up in the cluster. This does NOTHING, because stability is still on and screws everything up. So you must press and hold to make everything disable.

1) Press and hold the TC button
2) The TC icon will light up on the dash
3) Hold button until the light shuts off
4) Everything is disabled

You CAN be moving slowly to do this and it reset when you turn the truck off.

This is all in the owners manual, but I know alot of people dont look through it. So here it is
 
  #2  
Old 04-12-2010
Downey's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2007
Location: Muncy, PA
Posts: 8,470
Likes: 0
Received 6 Likes on 6 Posts
nice
 
  #3  
Old 04-12-2010
OTRtech's Avatar
Member
Join Date: Mar 2007
Location: Upstate,NY
Posts: 2,598
Likes: 0
Received 11 Likes on 11 Posts
I'm waiting for the "How to drive a pickup For Dummies" book to come out now with all the unnecessary junk they're putting in now.
 
  #4  
Old 04-12-2010
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
Originally Posted by OTRtech
I'm waiting for the "How to drive a pickup For Dummies" book to come out now with all the unnecessary junk they're putting in now.
Thank you FED.
 
  #5  
Old 04-12-2010
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
Originally Posted by OTRtech
I'm waiting for the "How to drive a pickup For Dummies" book to come out now with all the unnecessary junk they're putting in now.
Seriously, we were playing in the sand and mud and the AdvanceTrac held him back soo much.
 
  #6  
Old 04-18-2010
Masteratarms93's Avatar
Member
iTrader: (8)
Join Date: Mar 2010
Location: Goose Creek SC
Posts: 4,685
Likes: 0
Received 4 Likes on 4 Posts
You can't get a 2010 FX4. You also cannot get a 2009 FX4 I believe (not sure). But for sure you cannot get a 2010 FX4. They deleted that package this year (and maybe last). Your friend either got REALLY jipped or he has a reg 4x4 and someone is mis-identifying.

You might want to check into it.

If you don't believe me go to the Ford website and try to custom build an FX4.
 
  #7  
Old 04-18-2010
btm757's Avatar
Member
iTrader: (5)
Join Date: Jun 2009
Location: Norfolk / Chesapeake, VA
Posts: 3,980
Likes: 0
Received 1 Like on 1 Post
Its Called a 4x4 Sport
 
  #8  
Old 04-18-2010
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
Canada still has the FX4 line
 
  #9  
Old 04-18-2010
FULLSCALE's Avatar
Level III Supporter
iTrader: (12)
Join Date: Mar 2009
Location: Clinton, Ontario
Posts: 8,184
Likes: 0
Received 4 Likes on 3 Posts
We sure do! It's just a package you can add on to a 4x4 though if I remember correctly.
 
  #10  
Old 04-18-2010
morris's Avatar
RF Veteran
iTrader: (5)
Join Date: Feb 2008
Location: South Detroit.
Posts: 7,841
Likes: 0
Received 2 Likes on 2 Posts
yup yup.

canada +1!!
 
  #11  
Old 04-18-2010
04blackedge's Avatar
RF Veteran
iTrader: (13)
Join Date: Jan 2007
Location: Durham, NC
Posts: 23,426
Likes: 0
Received 6 Likes on 6 Posts
Originally Posted by Masteratarms93
You can't get a 2010 FX4. You also cannot get a 2009 FX4 I believe (not sure). But for sure you cannot get a 2010 FX4. They deleted that package this year (and maybe last). Your friend either got REALLY jipped or he has a reg 4x4 and someone is mis-identifying.

You might want to check into it.

If you don't believe me go to the Ford website and try to custom build an FX4.
Correct for the US, incorrect for Canada.
 
  #12  
Old 04-20-2010
Masteratarms93's Avatar
Member
iTrader: (8)
Join Date: Mar 2010
Location: Goose Creek SC
Posts: 4,685
Likes: 0
Received 4 Likes on 4 Posts
Gottcha
 
  #13  
Old 06-12-2010
Join Date: Jun 2010
Location: yorkton
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
that only worked one time for my ranger?is that the only way to disable that crap?
 
  #14  
Old 06-12-2010
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
Well you have to disable it everytime you turn the truck on, engage into 4wd or back to 2wd. And still sometimes it kicks in. That whole system is stupid
 
  #15  
Old 06-12-2010
Join Date: Jun 2010
Location: yorkton
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Ya its all stupid i was reading up on how its all run. its all running off the abs
 
  #16  
Old 06-13-2010
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
Yep, if you disconnect the abs it should work, but my roomate said the abs is also hooked to something important
 
  #17  
Old 06-13-2010
ShadowRanger08's Avatar
Member
iTrader: (3)
Join Date: Jan 2008
Location: Ontario, Canada
Posts: 1,694
Likes: 0
Received 0 Likes on 0 Posts
canada FTW! we also still have the mazda dual sport. haha, although with the B series getting the axe it may be gone now...

FX4 is an add on for the sport package, still called an FX4 though, not a sport
 
  #18  
Old 10-23-2010
DavidY's Avatar
Member
Join Date: Oct 2010
Location: Alberta
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Thanks very much.

I believe that the manual only tells one to hold the button down for 5 seconds....not until the icon turns off.

A few times last winter was very "interesting"....especially turns at intersections.

Dave
 
  #19  
Old 12-20-2010
DavidY's Avatar
Member
Join Date: Oct 2010
Location: Alberta
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
I have been doing this procedure a majority of the time that I drive. However, after this procedure this morning, I had noticed that AdvanceTrac had remained active when I was stopping at a stop sign and it was very slick at -21 deg C....the brake started to depress and vibrate....weird! I had only driven about a block as I was leaving my house.

At least the above procedure works most of the time. I was hoping that it would work all the time.

Anyone else experience the same?

Dave
 
  #20  
Old 12-20-2010
Tys 4x4 FTW's Avatar
RF Veteran
iTrader: (8)
Join Date: Jul 2008
Location: Las Vegas, Nevada
Posts: 6,575
Likes: 0
Received 2 Likes on 2 Posts
thats called antilock brakes. lol
 
  #21  
Old 04-07-2012
cwmt3's Avatar
Member
Join Date: Apr 2012
Location: Ontario
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
bump!

Is there a way to bypass having to push the nancy switch every time yet?
I live in Canada, where it snows; my shoulder hurts from always having to reeeach down!
 
  #22  
Old 04-07-2012
06FordFX4's Avatar
Member
iTrader: (1)
Join Date: Feb 2012
Location: Canada
Posts: 694
Likes: 0
Received 2 Likes on 2 Posts
pull the abs fuse.
or buy a ranger without all that crap lol.
thats literally the main reason i bought an older one. none of that crap on it
 
  #23  
Old 04-07-2012
cwmt3's Avatar
Member
Join Date: Apr 2012
Location: Ontario
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
abs eh? ive had trouble with the abs in my '00 3.0L, it would cut the speedometer out at around 80kms/hr. It was ridiculous, i had to replace a couple relays.. so I wonder if i removed the abs fuse would i get into any other trouble ie, my tach and speedometer not working?
 
  #24  
Old 04-08-2012
BigEdge126's Avatar
Member
Join Date: Jun 2005
Location: Havertown,PA
Posts: 486
Likes: 0
Received 0 Likes on 0 Posts
I had a 02 2 wheel drive and it was horrible in the snow. I have a 2010 2 wd Sport and i love the Advance Trac. Helps alot in slick conditions, and I have felt it kick in going around a corner and hitting a pothole where your truck suspension gets a little upset, it kicks in.
Maybe I'm in the minority, but I like it. It does give the ability to turn off, but whats the big deal that it defaults on when you turn your truck back on? It could save your life especially if you forgot to turn it back on when you back out on the normal roads.
 
  #25  
Old 04-09-2012
FMD's Avatar
FMD
FMD is offline
Member
iTrader: (1)
Join Date: Aug 2005
Location: Amherst NY
Posts: 3,873
Received 3 Likes on 3 Posts
Originally Posted by BigEdge126
I had a 02 2 wheel drive and it was horrible in the snow. I have a 2010 2 wd Sport and i love the Advance Trac. Helps alot in slick conditions, and I have felt it kick in going around a corner and hitting a pothole where your truck suspension gets a little upset, it kicks in.
Maybe I'm in the minority, but I like it. It does give the ability to turn off, but whats the big deal that it defaults on when you turn your truck back on? It could save your life especially if you forgot to turn it back on when you back out on the normal roads.
Judging by what you say, its amazing humans have lived this long without it
 


Quick Reply: How To: Disabling AdvanceTrac (2010+ models)



All times are GMT -6. The time now is 03:10 AM.