The front measures 33.5 "from the ground to the fender and 15" from the ground to the rocker what is your measurements cranked and ones that have never been cranked. no big deal if they were

 

y do u think they were cranked?

 

I think it sits kinda high for stock its higher them my dads silverado

 

silverados are just tiny haha

i have a pic next to christians truck and my sister asked if it was lowered

 

from looking at your avatar pic (the larger one in your profile page) i can tell your truck's torsion bars have not been cranked. cranked torsion bars will bring the front end higher than the rear, if maxed. (at least, mine did. don't max them, though)

 

crawl under and look at the bolts, how much is showing?
i dont think anyone would crank them, but who cares, now ur a lil higher

 

I just picked up an 05 sport trac and some one some time cranked the bars. No big deal but the alignment was off a bit and it wasn't level side to side.

 

I bought it new I'm the first owner so it shouldn't be cranked but looks like it has. Maybe dealer cranked it to make it level idk

 

I do not think that they were cranked. I cranked my t bars 1 inch, and I measured from the ground to the fender and it was 34 inches.

 

34 inches before you cranked them 1 inch so now it is 35 right

 

Nope they were originally 33 inches in the front.

 

All you have to do is look at the lower arms. Are they straight across like:
(Sorry about the crappy quality, it's the only pic I have of a non lifted truck. You can still see it's almost straight across from wheel to wheel.)

or are they like:

 

here it is, looks a little angled but idk no big deal if is

 

or they havent sagged yet

 

the control arms dont look cranked.. but it looks higher than mine did

 

I need to crank mine haha nicce truck!

 

They dont look cranked to me

 

i just bought my 03' xlt model and front looks a lot like yours. however, i cranked my T bars 1" on each side. (could only be cranked 1" for some reason.) I'll post a pick tomorrow for comparison.