my '99 ranger xlt doesnt have foglights but i would like to add the factory fogs. is it pre-wired? what parts do i need?

thanks for any help.

 

My 96 was. I believe ford puts the same wiring harness in all their truck wired for all the options. Just look up front behind the grille for plugs "hanging" down. or pull your radio bezel and their will be a plug snapped into the back of it where the normal foglight switch would be. Thats how my 96 is.

 

thanks...i saw the wires in my front wheelwells.. i havent pulled the dash bezel yet but i hope the switch wiring is there..

 

Id guess that if wires are in your wheel wells than the wiring will be behind your bezel. I think ford did this just to make it cheaper. Hell in mine the relay was even there to make it all work. lol.

 

Not all of the trucks came with the same wiring harness. I wasnt prewired for anything in my '99.

 

Mine wasn't, brother just ran a relay and they turn on when i turn the **** once, then when i have my main lights on.

 

Mine is.

 

where is the foglite relay located?

 

bah. i removed my radio bezel and there is no plug for the fogs.. meh. wtf. every '99 ranger ive seen in the junkyard so far has been pre-wired, even if it didnt have fogs..

grrrr wtf. ford makes no sense..

 

Go to the junkyard and get one. Get the bezel too if you don't have it.

 

i know i got a maz, but 99 and it isnt wired either

 

ha!!.. have you seen the wiring harness? no chance whatsoever at getting the fog wiring out.
its built into the main harness, intertwined with a million other wires... i tried to extract one out of a '99 ranger in the junkyard and gave up after an hour and sliced up hands..

ill have to make my own harness i guess.

 

^^ I ment get the plug out from a jy.

 

My 99 is prewired :) but I really don't feel like spending $200+ on foglights, valence, bezel, and HIDs. So I'm still fogless...

 

From what I've noticed if you have power windows/locks/mirrors you are really likely to be prewired for Fog and Cruise. If your truck has manual doors then odds are you aren't prewired.