New horn setup... Check it out.. Pics
#1
New horn setup... Check it out.. Pics
So some of you may have seen my thread on the fittings I bought from poweraire.com..
Well I got them today... Let's just say I have a lot of extras... That's what I wanted anyways...
I bought 30... and I used 8 lol...
I love the fittings! I got it all hooked up and went to a gas station and "tried" filling up the tank, but they only push at max like 65psi... So I left it at that. Come to find out in the rain, I didn't tighten the fittings down at the valve so I had a leak. After class I came home and tightened her up and now it's ready for air... Or should I say my Viair 380c coming on FRIDAY!!! WOOHOO!!!
Here's the new setup..
1/2in throughout the whole setup now. 1/4 to the gauge and now I'm running air brake line rated at I think 300psi burst instead of the roofing air line I was running... Much easier!
Fittings from Poweraire.com
How it's split to my two horns at the rear
What it looks like at the tank (right now)
What my valve looks like (orange hose is just temp til I go get a 1/8in brass plug)
My 4TH gauge... Dual pressure, blue backlit LED
And me being a BA finishing up the splitter and running the 1/2in hose (that's not fun btw lol)
Well I got them today... Let's just say I have a lot of extras... That's what I wanted anyways...
I bought 30... and I used 8 lol...
I love the fittings! I got it all hooked up and went to a gas station and "tried" filling up the tank, but they only push at max like 65psi... So I left it at that. Come to find out in the rain, I didn't tighten the fittings down at the valve so I had a leak. After class I came home and tightened her up and now it's ready for air... Or should I say my Viair 380c coming on FRIDAY!!! WOOHOO!!!
Here's the new setup..
1/2in throughout the whole setup now. 1/4 to the gauge and now I'm running air brake line rated at I think 300psi burst instead of the roofing air line I was running... Much easier!
Fittings from Poweraire.com
How it's split to my two horns at the rear
What it looks like at the tank (right now)
What my valve looks like (orange hose is just temp til I go get a 1/8in brass plug)
My 4TH gauge... Dual pressure, blue backlit LED
And me being a BA finishing up the splitter and running the 1/2in hose (that's not fun btw lol)
#5
#9
#10
#11
Yeah I have everything ran already... I just need to get the compressor so I can start hiding everything with loom... Its gonna look good! I'm gonna make some custom hold down straps for the tank and compressor... and line them with rubber... It's gonna be sweet... Since this will be the last compressor I have to buy haha
#12
#13
#15
#19
my buddy just got 4 horns from horn blasters (2gal tank). a waste IMO
#20
I've got a 5gal tank... One of the cheapy's from HF that only holds 125psi... I really want one of the 5gal 150wp psi tanks with a max pressure of like 300, but I can't find one for cheap and no one on here wants to get rid of theirs... So for now, my 5gal 125psi tank it is.. I can't wait to get the comp on friday!
#21
Thats what I'm getting, but later on when Ive got some extra $ im going to upgrade to a bigger tank and different compressor maybe. How long can he hold the horns for before they sound like crap? And how do they sound compared to yours?
#25
lets just say, i **** myself when i heard his. my stock horn is louder! mike bought 4 plastic horns + package from horn blasters (i hope he gets his money back). i have then kong II from seige engineering. 3 metal trumpets.