Your Trucks 'To Do' List
Your Trucks 'To Do' List
On my list of things to do, in no particular order:
Color match my mirrors.
Color match or buy a color matched valance.
LS rear
Brake light switch
Paint my rails.
CB, with hidden antenna
one of those sun visors - lit, color matched
Can we say, More lights?
Sliding rear window
75% tint on the front, 20% on the sides, 5% on the rear.
new tires.
12v Pwr point in the bed.
2004 lvl2 tow hooks, or 05/06 F250 tow hooks (their chrome)
Chrom the ends of my waag bar, JUST the ends, the vertical pieces.
Programmer
Better shocks
Maybe: a 3in suspension/body lift
Color match my mirrors.
Color match or buy a color matched valance.
LS rear
Brake light switch
Paint my rails.
CB, with hidden antenna
one of those sun visors - lit, color matched
Can we say, More lights?
Sliding rear window
75% tint on the front, 20% on the sides, 5% on the rear.
new tires.
12v Pwr point in the bed.
2004 lvl2 tow hooks, or 05/06 F250 tow hooks (their chrome)
Chrom the ends of my waag bar, JUST the ends, the vertical pieces.
Programmer
Better shocks
Maybe: a 3in suspension/body lift
New gears 4.56 (soon will have a new front diff with gears installed)
Herculined interior
secure my spare tire
Front and Rear hitch
Winch
AAL and T bar crank
Sport Trac Guages
IPOD interface for my Pioneer Deck
Step bars of some sort
Some other things that escape me right now
Herculined interior
secure my spare tire
Front and Rear hitch
Winch
AAL and T bar crank
Sport Trac Guages
IPOD interface for my Pioneer Deck
Step bars of some sort
Some other things that escape me right now
Heres what I want, or need to do...
Replace rear brake lines (ASAP, been disconnected for a month now)
2 more speakers (After Uncle Sam pays up)
Sub and Amp (see above)
3" BL (late summer early fall)
33" Tires (late summer early fall)
Sandblast and paint both bumpers, they are showing their rust again, I'll do it better this time (Summer)
Figure out a way to either flip the way my rear slider opens, or the front window opens on my cap, I loose alot of space for hauling long boards because they open in opposite directions.
Exhaust (Im too cheap to replace what isnt broken, so whenever the old one gives me probs)
Im sure I can think of other things later
Replace rear brake lines (ASAP, been disconnected for a month now)
2 more speakers (After Uncle Sam pays up)
Sub and Amp (see above)
3" BL (late summer early fall)
33" Tires (late summer early fall)
Sandblast and paint both bumpers, they are showing their rust again, I'll do it better this time (Summer)
Figure out a way to either flip the way my rear slider opens, or the front window opens on my cap, I loose alot of space for hauling long boards because they open in opposite directions.
Exhaust (Im too cheap to replace what isnt broken, so whenever the old one gives me probs)
Im sure I can think of other things later
Dang, I kinda wanna do the herculiner mod on the interior...i gotta see someone else's first though.
I forgot to add the paint to the flares. I want to paint the rear part where rocks kick up, mine is all torn up.
I forgot to add the paint to the flares. I want to paint the rear part where rocks kick up, mine is all torn up.
8.8 swap with discs, gears, and L/s or locker
add another 3 inches.
bigger meats and new wheels
rhino the bed.
sliding rear
tint
front bumper with winch
engine refreshed(13XXXX some odd miles)
tranny rebuilt
front end parts replaced. (balljoints, etc.)
long list and no money.
add another 3 inches.
bigger meats and new wheels
rhino the bed.
sliding rear
tint
front bumper with winch
engine refreshed(13XXXX some odd miles)
tranny rebuilt
front end parts replaced. (balljoints, etc.)
long list and no money.
-Install new Head lights and corners.
-At the dealer:
->Get headlights adjusted
->Get front end to stop shaking
->Fix transmission
-Install new LED corner bulbs and blinker
-Figure out why one off my KC's isn't working and fix it
-Repaint my rear bumper(possibly with Hurculiner)
-Possibly some painting on my valance(like Werty)
-Put my spare tire back under my truck
-Wash my truck
I think that is enough for now...
-At the dealer:
->Get headlights adjusted
->Get front end to stop shaking
->Fix transmission
-Install new LED corner bulbs and blinker
-Figure out why one off my KC's isn't working and fix it
-Repaint my rear bumper(possibly with Hurculiner)
-Possibly some painting on my valance(like Werty)
-Put my spare tire back under my truck
-Wash my truck
I think that is enough for now...
New engine <--- hopefully soon
Chrome grille guard
Manual trans. conversion
Restore it to like new shape, with a few modern amenities. Includes pulling everything apart and eliminating all rust, rust proofing, and painting it black... or some other dark color...
Poly bushings all around: suspension & body
2" BL
bigger tires
4wd conversion
Maybe a 3.8 TBI setup down the road
302 swap after its registered as antique
Chrome grille guard
Manual trans. conversion
Restore it to like new shape, with a few modern amenities. Includes pulling everything apart and eliminating all rust, rust proofing, and painting it black... or some other dark color...
Poly bushings all around: suspension & body
2" BL
bigger tires
4wd conversion
Maybe a 3.8 TBI setup down the road
302 swap after its registered as antique
In some sort of order:
- Door inserts with power switches
- Repair power locks
- Change interior colors to match new radio (blue -> green)
- Power Windows
- Power mirrors (heated, if possible)
- Possibly a radar detector in the OHC
- Door inserts with power switches
- Repair power locks
- Change interior colors to match new radio (blue -> green)
- Power Windows
- Power mirrors (heated, if possible)
- Possibly a radar detector in the OHC
-install suspension lift.
-install 33s on cragar soft 8s
-regear and lock to 4.56
-shocks
-cb
-start mods for more power, underdrive pulleys, CAI, full exhaust starting at headers, etc.
more i'm sure..
-install 33s on cragar soft 8s
-regear and lock to 4.56
-shocks
-cb
-start mods for more power, underdrive pulleys, CAI, full exhaust starting at headers, etc.
more i'm sure..
regear to 4:56's (all I need is to get the rear gears already have the front)
front locker
finish mounting the winch
finish mounting the CB
finish the bed ( turning it into a sleeping area)
mount some back up lights
new rims
maybe new tires
front locker
finish mounting the winch
finish mounting the CB
finish the bed ( turning it into a sleeping area)
mount some back up lights
new rims
maybe new tires
lets see:
- mountaineer center console
- E-Fan
- Explorer rear
- B&M Shift+
thats all the stuff i have now just need the time to do and some more knowledge
After:
- Camburg 6.0 Performance
- New Tires
- Bed Cage
- mountaineer center console
- E-Fan
- Explorer rear
- B&M Shift+
thats all the stuff i have now just need the time to do and some more knowledge
After:
- Camburg 6.0 Performance
- New Tires
- Bed Cage
where to start ?
1' body lift (stop rubbage)
rear speakers
amp for speakers
light bar
some sort of front bumper (dunno yet)
rear bumper
bed liner
new headunit
gears 4.10
programmer
flowmaster
hahahh this just goes on an on an on
1' body lift (stop rubbage)
rear speakers
amp for speakers
light bar
some sort of front bumper (dunno yet)
rear bumper
bed liner
new headunit
gears 4.10
programmer
flowmaster
hahahh this just goes on an on an on





