Ranger Forum Newbie, VSC Install?
#1
Ranger Forum Newbie, VSC Install?
Not quite a rookie when it comes to technical forums, typically drive a few E250 cargo vans for work, owned by me. And I hope this is the right forum for my question?
Have a neighbor who'd like to add the factory Vehicle Speed control to his '08 Ranger. In fact if possible to obtain and re-fit his truck with such a kit or assembled OEM parts it shouldn't be too difficult. I'll NOT mess with anything aftermarkket at all-----nada, zip, zilch zero, No Way Jose!
If anyone here has ever done this themselves please enlighten me. Is there a prerequisite like factory-installed wiring harness etc---this is the case on the E-Series.
Is there a kit available or anywhere I can download or view the factory re-fit installation instructions? Those would be very helpful.
Anyway thanks for looking and hoping to hear from the Ranger bunch.
Have a neighbor who'd like to add the factory Vehicle Speed control to his '08 Ranger. In fact if possible to obtain and re-fit his truck with such a kit or assembled OEM parts it shouldn't be too difficult. I'll NOT mess with anything aftermarkket at all-----nada, zip, zilch zero, No Way Jose!
If anyone here has ever done this themselves please enlighten me. Is there a prerequisite like factory-installed wiring harness etc---this is the case on the E-Series.
Is there a kit available or anywhere I can download or view the factory re-fit installation instructions? Those would be very helpful.
Anyway thanks for looking and hoping to hear from the Ranger bunch.
#2
#3
Thank you Shelton---I appreciate that info!
I was hoping for something more specific to the '08 though---finding the OEM number(s) isn't my problem at all.
I'm seeking what connector(s) need to be present in the '08's in order to simply add and connect the VSC components and drive happy. Is it necessary to have something in the PCM "turned on" in order to recognize and properly operate the VSC servo or whatever controls the throttle?
I was hoping for something more specific to the '08 though---finding the OEM number(s) isn't my problem at all.
I'm seeking what connector(s) need to be present in the '08's in order to simply add and connect the VSC components and drive happy. Is it necessary to have something in the PCM "turned on" in order to recognize and properly operate the VSC servo or whatever controls the throttle?
#4
#5
There are no visible XL or XLT designations. It is 2WD, extended cab withOUT power windows or power door locks, standard AM/FM radio.
I do understand whether its pre-wired makes a difference, what I'm asking is how do I tell if it is? On my E-Series the connector for the throttle servo needs to be present otherwise that chassis cannot be fitted with the OEM VSC.
Has anyone here done this addition with OEM parts? Would this question be better asked in another forum here?
I do understand whether its pre-wired makes a difference, what I'm asking is how do I tell if it is? On my E-Series the connector for the throttle servo needs to be present otherwise that chassis cannot be fitted with the OEM VSC.
Has anyone here done this addition with OEM parts? Would this question be better asked in another forum here?
#6
yea several people have...let me see if i can dig the threads up...but it sounds like its an XL which leads me to believe its not prewired
here is one from another site
http://www.fordrangerforum.com/how-s...e-control.html
here is one from another site
http://www.fordrangerforum.com/how-s...e-control.html
Thread
Thread Starter
Forum
Replies
Last Post