For Sale: 2004 Stock Stuff - Lots of stuff... So-CAL
#1
2004 Stock Stuff - Lots of stuff... So-CAL
Ok, before I say anything else.
Prices are OBO, please if you don't like the price, don't badger me about it, if it doesn't sell, I might lower the price after a while. If you want to shoot me an offer, send me a PM with a reasonable offer. If I don't like you're offer, I MIGHT shoot you a counter offer, or politely tell you no.
Also, YOU pay shipping. A couple things I will not ship, but might meet depending on distance, and might charge a small fee.
Anyways, all of this stuff I pulled off my stock 2004 Ext Cab Ranger Edge 4.0L 4x4.
Here we go:j
Stock Headlights and Corners, will sell all together, or seperate the set of lights and the set of corners for now. Don't really want to sell individually just yet.
Headlights and Corners together : $65
Headlights alone (set) : $50
Amber Corners (set) : $20
Stock 2 bulb tail lights (set) : $40 - SOLD
Stock 3rd brake light (1 bulb) : $15 - SOLD
Stock Dome Light : $10 - SOLD
Stock Mud Flaps : $15 (Nothing wrong, just a little dirty, I will clean before shipping)
Next Item Up, I'd prefer not to ship, but I am willing to look into it, to price it, most likely will not be cheap.
Stock Ext Cab Running Boards... has all bolts except for front 2, couldn't get them off truck, but I will try again, I'm sure you can pick up cheap at any hardware store.
Asking $80 OBO. Need cleaned up, minimal surface rust, need a little TLC.
Front bracket w/o bolts
The little bit of rust on them
Next up, is plastic drop in factory bedliner (step-side, short-bed) with ford logo (Pick-up only on this, or will meet)
It's in great shape, been covered by a tonneau cover, very little scratches, nothing really deep.
Last up is my snap on tonneau cover (step-side, short-bed)
It's in great shape, I even have the original install instructions, all hardware, bracekets, bars, etc. Brand new cost almost $200... asking $110 OBO.
Trying to get some money back from all the mods I'm doing. I need a low profile step-side tool-box, a polished billet grille, if you have either, PM me, might be willing to deal a little. Also looking for a couple 06 ranger fender badges.
P.S. I am keep the rail caps for the bed, for now, but if you make me the right offer, I might be willing to part with them.
Thanks for looking, look forward to hearing from you.
Prices are OBO, please if you don't like the price, don't badger me about it, if it doesn't sell, I might lower the price after a while. If you want to shoot me an offer, send me a PM with a reasonable offer. If I don't like you're offer, I MIGHT shoot you a counter offer, or politely tell you no.
Also, YOU pay shipping. A couple things I will not ship, but might meet depending on distance, and might charge a small fee.
Anyways, all of this stuff I pulled off my stock 2004 Ext Cab Ranger Edge 4.0L 4x4.
Here we go:j
Stock Headlights and Corners, will sell all together, or seperate the set of lights and the set of corners for now. Don't really want to sell individually just yet.
Headlights and Corners together : $65
Headlights alone (set) : $50
Amber Corners (set) : $20
Stock 2 bulb tail lights (set) : $40 - SOLD
Stock 3rd brake light (1 bulb) : $15 - SOLD
Stock Dome Light : $10 - SOLD
Stock Mud Flaps : $15 (Nothing wrong, just a little dirty, I will clean before shipping)
Next Item Up, I'd prefer not to ship, but I am willing to look into it, to price it, most likely will not be cheap.
Stock Ext Cab Running Boards... has all bolts except for front 2, couldn't get them off truck, but I will try again, I'm sure you can pick up cheap at any hardware store.
Asking $80 OBO. Need cleaned up, minimal surface rust, need a little TLC.
Front bracket w/o bolts
The little bit of rust on them
Next up, is plastic drop in factory bedliner (step-side, short-bed) with ford logo (Pick-up only on this, or will meet)
It's in great shape, been covered by a tonneau cover, very little scratches, nothing really deep.
Last up is my snap on tonneau cover (step-side, short-bed)
It's in great shape, I even have the original install instructions, all hardware, bracekets, bars, etc. Brand new cost almost $200... asking $110 OBO.
Trying to get some money back from all the mods I'm doing. I need a low profile step-side tool-box, a polished billet grille, if you have either, PM me, might be willing to deal a little. Also looking for a couple 06 ranger fender badges.
P.S. I am keep the rail caps for the bed, for now, but if you make me the right offer, I might be willing to part with them.
Thanks for looking, look forward to hearing from you.
Last edited by RLong31; 03-18-2010 at 07:12 PM.
#3
I never noticed any hazing on them until I bough brand new ones and set em up next to it. So it's almost non-existent. I'm pretty sure there aren't any scratches, but I will look in the AM really close to verify. I wasn't planning on selling with any lamps, but I do have 2 brand new, never used, regular sylvannia 9007's that I could include for a small additional price, $15 maybe?
#10
with that cover can you lift it up or on roll it or how does it work? cuz if im looknig at it right it looks like it will still have the bars going across you unsnap the cover and any installes pics??? and would you separate the tail gate cover too? thanks
#11
It is just a button down, you can remove the middle support bars, and at the front of it, it has "strings", looks like web belt sorta, so you can roll it up, and tie it at the front. Let me run out and take a couple pics so this makes sense. And I'll get a good one up of it installed on the truck.
As far as the tailgate cover, I'm assuming you mean the plastic bed-liner part. For now, I'd like to keep it together, I would think it might sell easier that way. I wrote your username down and will keep you in mind if I do end up selling it seperate.
As far as the tailgate cover, I'm assuming you mean the plastic bed-liner part. For now, I'd like to keep it together, I would think it might sell easier that way. I wrote your username down and will keep you in mind if I do end up selling it seperate.
#12
Here's more pics of the tonneau cover.
Pic of it installed
Pic of the tie down strings so you can roll it up
Last pic is showing how the bars can come out really easily so it can be rolled up
Pic of it installed
Pic of the tie down strings so you can roll it up
Last pic is showing how the bars can come out really easily so it can be rolled up
#13
Bumpity Bump. I quoted another member shipping from CA to SC and it was close to $40 on the tonneau cover. It's wrapped up and ready to ship. If you're interested and closer, it will certainly be cheaper than that to ship, and I can ship immediately after payment. Still have mud flaps, head lights, corners, and the bed liner. REMINDER: This is for a STEPSIDE bed. :)
#15
Yea, my stepside is really starting to get on my nerves. Can't find a toolbox, can't sell my tonneau cover, rail caps have to stay on, and I can't get rid of my bed liner. Thanks for the bump tho. If anybody's interested in anything, PM me offers. I know someone needs some headlights to mod at the very least. Need to get rid of this stuff :)
#16
Yea, my stepside is really starting to get on my nerves. Can't find a toolbox, can't sell my tonneau cover, rail caps have to stay on, and I can't get rid of my bed liner. Thanks for the bump tho. If anybody's interested in anything, PM me offers. I know someone needs some headlights to mod at the very least. Need to get rid of this stuff :)
#22
running boards
Can you get me a quote on shipping to Edgeley Saskatchewan Canada ? it's probobaly high but maybe not oh i'm new here but as reference you can check out my feedback on ebay i'm paddd69 there
thanks
paddd
thanks
paddd
#24
These are rear flaps. Fender cut-outs? I'm guessing you mean for flares? I'm steppie, no flares. I can try to take better pics tomorrow and get em up if you like. Might even clean em for ya, cuz I'm a nice guy like that.
Thread
Thread Starter
Forum
Replies
Last Post
Police Interceptor
OLD - Interior, Exterior, Electrical, & Misc.
23
04-28-2010 04:54 PM
Fx4wannabe01
Interior Semi-Tech
16
02-16-2007 12:39 PM