Explorer seats in Standard cab????
#1
#5
Originally Posted by 1stfordedge
do search on explorer seats and you will find all info you need. explore electris seat platform wiil hve differant floor configuration than single cab
#6
Originally Posted by mountain ranger
I am well aware of that. I just want to know why you cannot use the power options after switching the track to fit them to the floor. I searched on 4 different forums before I posted and did not find the answer.
the power options are ON THE TRACKS
so if you remove the explorer tracks, it no longer has a power slider, the ONLY WAY areound this, is to modify the stock explorer tracks to fit the ranger, IE weld on extensions or shorten where needed
#7
Originally Posted by Gay-briel
the power options are ON THE TRACKS
so if you remove the explorer tracks, it no longer has a power slider, the ONLY WAY areound this, is to modify the stock explorer tracks to fit the ranger, IE weld on extensions or shorten where needed
so if you remove the explorer tracks, it no longer has a power slider, the ONLY WAY areound this, is to modify the stock explorer tracks to fit the ranger, IE weld on extensions or shorten where needed
not too sure about single cabs but my all i had to do to my leather sportrac buckets is use a dremel to open up the bolt holes a little bit...
#8
Originally Posted by Sad_Savant
not too sure about single cabs but my all i had to do to my leather sportrac buckets is use a dremel to open up the bolt holes a little bit...
#9
Originally Posted by Gay-briel
the power options are ON THE TRACKS
so if you remove the explorer tracks, it no longer has a power slider, the ONLY WAY areound this, is to modify the stock explorer tracks to fit the ranger, IE weld on extensions or shorten where needed
so if you remove the explorer tracks, it no longer has a power slider, the ONLY WAY areound this, is to modify the stock explorer tracks to fit the ranger, IE weld on extensions or shorten where needed
#10
#11
Originally Posted by Needforspeed3685
I put explorer seats in my ranger and had to change the tracks over from the explorer tracks to the stock tracks.
The Explorer power seats only match with the extended cab Ranger floor pans.
The Explorer power seats only match with the extended cab Ranger floor pans.
#12
Originally Posted by Needforspeed3685
I put explorer seats in my ranger and had to change the tracks over from the explorer tracks to the stock tracks.
With the Explorer seats swapped over to the Ranger tracks, can you still adjust the seat position (backward/forward, up/down, etc.)?
#13
Originally Posted by Rockledge
Do the Explorer seats bolt right up to the Ranger standard cab seat tracks?
With the Explorer seats swapped over to the Ranger tracks, can you still adjust the seat position (backward/forward, up/down, etc.)?
With the Explorer seats swapped over to the Ranger tracks, can you still adjust the seat position (backward/forward, up/down, etc.)?
By the way were in CT are you?
#14
My Explorer seats bolted right up to my 60/40 tracks with no modification necessary. Just have a set of Torx drivers, and few large sockets (I believe 17mm?), and some patience.
With my explorer seats I can adjust the lumbar position, the back position, and the distance from the dash. It's a very comfy seat:
Edit:
The only thing is you can barely see part of the former 60 seat bracket that held the center seat support. It's barely visible by the seat belt bracket on the driver's side seat. It could easily be cut off, but I left it on and connected a wire loom to it for power to some underseat neon's.
With my explorer seats I can adjust the lumbar position, the back position, and the distance from the dash. It's a very comfy seat:
Edit:
The only thing is you can barely see part of the former 60 seat bracket that held the center seat support. It's barely visible by the seat belt bracket on the driver's side seat. It could easily be cut off, but I left it on and connected a wire loom to it for power to some underseat neon's.
Thread
Thread Starter
Forum
Replies
Last Post
mmulkey6
General Ford Ranger Discussion
18
03-11-2007 06:52 PM
mmulkey6
General Ford Ranger Discussion
7
03-08-2007 05:37 AM
crooked02edge
2.9L & 3.0L V6 Tech
18
06-14-2006 10:25 PM