These any good?
#1
These any good?
Saw these spindles on ebay, anyone know if they're any good?
thx for any input
http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
thx for any input
http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us
#3
You get what you pay for. IMO get a fabtech to start out with. Then if you want something better go Camburg or Dixon Bros. Fabtech ones will come with 3" spindles, shocks and springs(front and rear shocks), control arms with bushings, lift block for the rear and AAL, alignment cam and bolt kit.
You may be paying more in the long run for those ebay junks, because they will wear out. Will have to replace bushings, and shocks and whatever else. If you want to do a cheap lift then just throw on a good 3" body lift. I love my fabtech one it lifts my truck up and can take some abuse, though jumping 20ft sandunes is out of the question. They will break!
You may be paying more in the long run for those ebay junks, because they will wear out. Will have to replace bushings, and shocks and whatever else. If you want to do a cheap lift then just throw on a good 3" body lift. I love my fabtech one it lifts my truck up and can take some abuse, though jumping 20ft sandunes is out of the question. They will break!
#5
#6
Member
iTrader: (1)
Join Date: Feb 2005
Location: SoCal
Posts: 4,428
Likes: 0
Received 0 Likes
on
0 Posts
I ran the doestch spindles for a year, beat the hell out of them with no worries, now they are on another Ranger that is beat on badly and they are still perfectly fine.
He has an EDGE, so no coils/springs for him.
You get what you pay for. IMO get a fabtech to start out with. Then if you want something better go Camburg or Dixon Bros. Fabtech ones will come with 3" spindles, shocks and springs(front and rear shocks), control arms with bushings, lift block for the rear and AAL, alignment cam and bolt kit.
#11
are these the ones you have? i'm about to buy them, i don't wanna screw up here
thx
#12
Thread
Thread Starter
Forum
Replies
Last Post
Jp7
Interior Semi-Tech
19
04-23-2011 10:07 PM