who makes a suspention lift for 2003 ranger
#1
#2
RCD . . .
http://www.racecardynamics.com/produ...rangerfull.htm
Superlift . . .
http://superlift.com/
http://www.racecardynamics.com/produ...rangerfull.htm
Superlift . . .
http://superlift.com/
#4
I sell the Superlift suspension packages for your truck. Contact me if you would like more information and pricing.
Nick Ramon
ttperformancein.com
nicholas@ttperformanceinc.com
Nick Ramon
ttperformancein.com
nicholas@ttperformanceinc.com
#5
Originally Posted by savage05
i want to lift my 03 4wd ranger but can't find anyone who makes a lift kit and body lift i have been reading the thread but havent found anything can anyone help
#6
#9
03+ has the bigger rotors which the rcd doesnt work on, but all you need to do is get the smaller rotors and swap them. its that easy. best thing to do is measure your rotors i think the 10.5 are the size that works and the 11.5 dont, because some 03s have the smaller rotors.
RCD is on alot of sites, so is the superlift, anyone that carries rcd or superlift can get the kit for you, you just have to ask.
the superlift is around 1400
rcd is around 2300
the superlift requires the superlift driveshaft and as far as im concered the rcd does also, this will run you somewhere around 400.
the only other thing you would need is the smaller rotor for the rcd which you can get the smaller rotors at napa for under 100.
RCD is on alot of sites, so is the superlift, anyone that carries rcd or superlift can get the kit for you, you just have to ask.
the superlift is around 1400
rcd is around 2300
the superlift requires the superlift driveshaft and as far as im concered the rcd does also, this will run you somewhere around 400.
the only other thing you would need is the smaller rotor for the rcd which you can get the smaller rotors at napa for under 100.
#11
Originally Posted by graniteguy
Does the kit go up to 2005?
I don't see why not, there are member that put them on ther '04. The RCD kit won't work on trucks made after March of '03. You can put it on later models, but I think a whole needs to be drilled in the someehere and smaller rortors need to be put on.
#12
Originally Posted by HarryTasker
The RCD kit won't work on trucks made after March of '03.
and both kits should work fine on 05 if you do what i said is needed. im pretty sure someone already has it on an 05.
#14
#16
I'm trying to remember what RCD told me, but the only concern for their lift on 04+ is our rotor size. Everything else regarding the lift still works on us. I believe RCD told me I'd need to drop down to a 11.25 in rotor. I need to call them anyhow and double check things as my b-day is next month and I'm tired of torsion bars
#18
#20
#21
Originally Posted by graniteguy
If anyone knows the answer to "superlift" i would appreciate it. Just swap the rotors and it is OK?
this rotor swap is NOT required or needed on the superlift... i already said what was needed. im almost 100% sure i didnt miss anything besides the pvh that trent is talking about but that is 2000 and under.
#24
#25