undefinedundefinedundefined Wut size can i fit?? 3 inch body maxed t bars,, and rear aal & shackle??? thanks.. picxs would b nice

 

33x12.5 most likely.

 

I had 35/12.50/15 on 15x8s on my 01 with a body lift and torsionbars maxed out

 

i was thinking 34x10.5 ltb`s or 33-12.5 ltbs

 

you wont be able to fit 34's....give that up on just a body lift alone.....

to me 33's are too much tire for a body lift alone....but hey it is your truck...



BTW: do a search, this kind of topic comes up every other day...or just browse the tire/wheel section...

 

33x12.50's on 15x8's fit with no rubbing on a 98+ 4x4 with 3" body lift. As long as you don't have some funky offset wheels. Cranking the torsion bars will make it ride like ****, and won't allow the front suspension to do it's job. It also won't allow bigger tires, the suspension will still compress to the bumpstop.

 

An old Xed member from here had 35 with just a 3in BL and cranked t-bars(I believe),no flex room and rub the fenders like crazy offroad.

 

well im doing 32x11.5 with just torsion crank.. :)

 

If it is a street queen- 35's but if you do any wheelin at all 33's. in the pic i have 33x11.50
i could fit 35's no problem but i would get no flex.

 

that on stock rims?? i doing 34x10.5x16. will they fit on stock rims? i putting cutsom shocks on, or just bolt on to regain some stability. is this do-able on stockers?

 

and i enjoy cutting. its custom. lower frony bumper is about to get puller off and rolled. for more ability to go up incline,, or down.

 

You can fit 35s but for offroading benefit go with 33s

 

i want the 34" LTB, anything to say about them? i mud ALOT not as much rocks. etc.. and i might as well go tall if i gott 10.5, which is skinny i suppose.but i dont want new rims..

 

sure i think those tires would fit on stocker rims. mine are wider and they fit on stockers.removing your valance will help with flex issues. If you like cutting then you could cut part of you OEM fender off to allow for allot of flex.

 

ok wuts a valance? and how wide can i go with stocks? 16.? and the oem is going to be trimmed

 

heres 3" spindles and 35s..not a hell of a lot of room

 

F-ing goregeous TRUCK!!!! not 4x kinda weak,, anyone please help i want ltb`s should i go 34x10.5 or 33x12.5?!?!?!!! i trying to use stock t drops... any help or pics.. i doing torsion, and shackle. and then 3 inch body... thanks guys

 

the valance is the plastic part of the bumper. ur fog lights are mounted in it. i think 12.50 might look kind of goofy on stockers. the stock rims i think are 8 inches.

 

16x7

 

you prob could run the 34 LTBs cause LTBs run small anyways if its a 34 its prob more like a small 33

 

I have a BL and maxed t-bars with 35s and wheel whenever I get a chance and have never rubbed offroad. The IFS hates to flex especially with the t-bars maxed out so I never worried about rubbing. The only trimming I did was to the inside of my fender flares and you can't even see where i cut. As far as the rear, the tires tuck up perfectly when I am flexed out without any trimming.

 

I have a BL and maxed t-bars with 35s and wheel whenever I get a chance and have never rubbed offroad. The IFS hates to flex especially with the t-bars maxed out so I never worried about rubbing. The only trimming I did was to the inside of my fender flares and you can't even see where i cut. As far as the rear, the tires tuck up perfectly when I am flexed out without any trimming.

 

yeah they are 33.8 i beleve. and i maxed T-bars. it barely sits up front i got about 2 1/2. i doing 3 inch body sooon so i figure 34 is way to go ,, i have a set of 36x14.5. sitting but they wont fit so. 34 is good for now. im all about mud, and i broke that valance part. damn ice in snowbanks. destroyed brackets for fog lamps ,, but got new ones ,, gonna put them in grill