I have a 1990 Extended cab, 2 WD, long bed
I’m installing a 1.5” lift/level kit and going from 14” wheels and tires to 15” wheels and tires, I have 30x9.50 General Grabber tires going on it,
I’m unsure of whether or not I’m going to need spacers and if so what size,(1”,2”,3”,etc.)?
I do know that my bolt pattern is 5-4.5
TIA

 

Your going up a size on the wheel to 15" by what???? That would determent if you need spacer of not. I have a 4" lift in the front and 2" out back, 15x10 with 33x12.5. Had to put 2" wheel spacer on the rear to match the front.
this is on a 2006 2x4 sport.

 

I’ll have to measure the width of my rims, not sure of it, I do know they came off of a newer Ranger, as soon as I get home in the morning I’ll measure and post the width, to be honest I hadn’t thought of that, thank you for your answer

 

I’m going to a 15x8 wheel with 30x9.50 tire, any help is appreciated

 

15x8 should be find. you won't need spacer. I'm only using them in the rear to match to poke on the front, Since i'm on 15x10.

 

Thank You sir, I appreciate it, I’ve been doing my own mechanical work on my vehicles for some time but this is the first lift kit I’ve done, my 06 Dodge is next😁😁