2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

3.0 Nearly stalling.

Thread Tools
 
Search this Thread
 
  #1  
Old 05-30-2013
Dave1187's Avatar
Member
Thread Starter
Join Date: May 2013
Location: Ohio
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
3.0 Nearly stalling.

I have a 2000 Ranger XLT 4x4. It has the 3.0L engine with 175k on it.

Today it started to loose rpms when coming to a stop. It would nearly stall. The day went on seemingly ok. Then this evening when in a neighborhood thankfully, it lost all power, the battery light came on and steering wheel locked up and it was at 2-300 rpm. I turned it off then turned it back on as if nothing happened. *Note A/C was cranking full blast. Many times after that as I would near a stop the rpms would either shoot up as i was slowing down, therefore jerking the truck or the rpms would drop off to 500 or below then go back to normal. I have no ideas what this could be. Any help is much appreciated.
 
  #2  
Old 06-28-2013
Join Date: Nov 2010
Location: eafb, sd
Posts: 545
Likes: 0
Received 0 Likes on 0 Posts
clean your maf sensor. do you have a check engine light? mine did this and i cleaned my maf sensor and it fixed it, had to really soak it. if that dont do it check your iat sensor.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pyrofallout
2.3L & 2.5L I4 Tech
4
06-08-2008 10:32 AM
Dosh142
General Ford Ranger Discussion
7
05-15-2006 05:35 AM



Quick Reply: 3.0 Nearly stalling.



All times are GMT -6. The time now is 04:34 PM.