2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

Almost hydrolocked engine

Old Sep 11, 2011
  #1  
PAShooter's Avatar
Thread Starter
|
Member
Joined: Jul 2010
Posts: 908
Likes: 0
From: Altoona, PA
Almost hydrolocked engine

Well i hit a hole today while mudding and my truck stopped dead in its tracks. We pulled it out and did the usual. Pull intake and clean it, pull plugs and crank it over.

My battery is ruined but we got it back to my house under its own power. We lost one plug so it missed the whole way.

My question is, what should i do now?
 
Reply
Old Sep 11, 2011
  #2  
Shaaaft's Avatar
Member
Joined: May 2011
Posts: 49
Likes: 0
From: pittsburgh
Pray?
 
Reply
Old Sep 11, 2011
  #3  
amgcustoms's Avatar
Member
Joined: Jan 2010
Posts: 108
Likes: 0
From: cranston,ri
you can try to drain the oil take the oil form your catch poor it through again do the same with the coolant, let it sit for 24 hours. pull plugs blow out with air. pull intake system let it sit for 24 hours.
 
Reply
Old Sep 11, 2011
  #4  
04RangerDave's Avatar
JDM> RANGER
iTrader: (3)
Joined: Jul 2010
Posts: 5,031
Likes: 3
From: RI
replace all fluids
 
Reply
Old Sep 11, 2011
  #5  
StxDangerRanger's Avatar
RF Veteran
iTrader: (2)
Joined: Dec 2010
Posts: 6,315
Likes: 8
From: Michigan
Coolant/Oil Change. If it drove under its own power without any major noises or stuff like that. You didn't hydrolock it. Just keep an eye on it for a week.
 
Reply
Old Sep 11, 2011
  #6  
kanuck15's Avatar
Member
Joined: Mar 2011
Posts: 844
Likes: 0
From: Pennsylvania
Yeah fluids, to include trans transfer case diffs and power steering. Also airing out helps. Clean the MAF as well as unhook the main engine plugs and spray wd40 on them. Its tedious but it helps a lot
 
Reply
Old Sep 12, 2011
  #7  
PAShooter's Avatar
Thread Starter
|
Member
Joined: Jul 2010
Posts: 908
Likes: 0
From: Altoona, PA
New plugs, and a battery and it fired right up. No sounds or odd vibarations. Gonna change oil tomorrow, is there any problem with driving it tomorrow with the possibility of water in the oil?
 
Reply
Old Sep 12, 2011
  #8  
kanuck15's Avatar
Member
Joined: Mar 2011
Posts: 844
Likes: 0
From: Pennsylvania
Id play that one by how the oil looks. The worse it looks the worse an idea it is. So use judgement
 
Reply
Old Sep 12, 2011
  #9  
PAShooter's Avatar
Thread Starter
|
Member
Joined: Jul 2010
Posts: 908
Likes: 0
From: Altoona, PA
its just looks like used oil, darker than it should. But not milky or anything
 
Reply
Old Sep 12, 2011
  #10  
Taylor's Avatar
Ive been dubbed....an old volk
iTrader: (18)
Joined: Mar 2010
Posts: 7,110
Likes: 3
From: Nashville, NC
Good thing it wasnt worse.

Did you change any of your other fluids?
 
Reply
Old Sep 12, 2011
  #11  
PAShooter's Avatar
Thread Starter
|
Member
Joined: Jul 2010
Posts: 908
Likes: 0
From: Altoona, PA
I am changing coolant tomorrow, i wasnt submerged in water or anything. It just shut off and within 2 or 3 minutes i was pulled out so i think the diff's are okay. I donno about the tranny fluid. Do you guys think i should change it?
 
Reply
Old Sep 12, 2011
  #12  
kanuck15's Avatar
Member
Joined: Mar 2011
Posts: 844
Likes: 0
From: Pennsylvania
If it were mine I wouldn't unless it was under water, its the same as water splashing on it
 
Reply
Old Sep 12, 2011
  #13  
PAShooter's Avatar
Thread Starter
|
Member
Joined: Jul 2010
Posts: 908
Likes: 0
From: Altoona, PA
It shifted fine the night of and when i drove it up the road and back today. i think ill be fine with just changing oil, coolant and power steering
 
Reply
Old Sep 13, 2011
  #14  
PAShooter's Avatar
Thread Starter
|
Member
Joined: Jul 2010
Posts: 908
Likes: 0
From: Altoona, PA
oil , coolant, and air filter changed. I didnt have as much power today as i think i normally do. Hopefully this fix's it
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
darangerdanger
General Ford Ranger Discussion
17
Aug 25, 2010 01:29 PM
wvcat
Snapshots
38
Jun 18, 2009 05:13 AM
FMD
Snapshots
26
Apr 28, 2009 12:20 PM
l2en
General Technical & Electrical
26
Oct 26, 2006 02:33 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 03:45 PM.