Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   2.9L & 3.0L V6 Tech (https://www.ranger-forums.com/2-9l-3-0l-v6-tech-32/)
-   -   Injectors? (https://www.ranger-forums.com/2-9l-3-0l-v6-tech-32/injectors-124388/)

hurley 06-27-2011 06:16 AM

Injectors?
 
Hi guys, I have a problem. I think my fuel injectors are shot. When I am in 1st 2nd or 3rd gear and I let off of the gas the truck starts to buck lightly then it gets worse if I do not hit the gas or clutch. Also when its idling it struggles to stay alive even after it warms up. Does this sound like the injectors? If so should I stick with stock or go aftermarket? Also how much should I pay for aftermarket? And will I get any performance boost from aftermarket? Thanks guys.

Timberwolf 06-27-2011 06:34 AM

Wirelessly posted (Timberwolf)

Could be.....give your vac line, plugs a gander.

hurley 06-27-2011 06:38 AM

Where are the located and what do they look like? Also what am I looking for?

Timberwolf 06-27-2011 06:58 AM

Wirelessly posted (Timberwolf)

I would have to check my Haynes book, but I do know to gain access to the injectors you would have to remove the upper intake manifold. But, if you were to work on this system, you must relieve fuel pressure. There are critcal steps for removing injectors. Personally, I dont have the guts to work on injectors, seeming you must know what your doing. Im sure some gearheads will chime in on injector removal help. Sorry buds and good luck.

hurley 06-27-2011 07:03 AM

If its really that tricky then I don't think I can trust myself to do it. I'm gonna look through my haynes book and check it out.

Clinton 06-27-2011 08:34 AM

I dont think its your injectors. When was the last time you checked the coil pack, plugs and wires?

hurley 06-27-2011 09:00 AM

not since i bought the truck. i have only put like 5*** on the plugs and wires, but the coil pack wasnt changed.

Timberwolf 06-27-2011 09:53 AM

Wirelessly posted (Timberwolf)

Do you have a code reader? Sounds like one of your chambers are mis firing by your discription.

hurley 06-27-2011 10:14 AM

My CEL is on but I havnt gotten it checked yet.

Timberwolf 06-27-2011 11:01 AM

Wirelessly posted (Timberwolf)

I wouldn't want you to frig up your rig man. You should park it until you find out what code your throwing. IMHO

hurley 06-27-2011 11:13 AM

yeah im only driving it if i absolutly have to

hurley 07-07-2011 05:58 PM

So I'm stumped. I just replaced my wires and it still runs like crap. My CEL turned off for a little while but its back. It doesn't want to start. It will be cracking for fifteen seconds three or four times before it starts. The idle is really rough like vroom...vroom...vroom. could this be my coil pack? My plugs and wires are new. WTF!!!! I havnt gotten the codes read yet, just wonderin if anyone can give me an idea whats wrong.

hurley 07-08-2011 08:17 AM

Bump I need to fix this

Vonhanson 07-08-2011 09:16 AM

go get your codes read, then we can help you out a lot easier.

hurley 07-08-2011 09:20 AM

im gonna try today but im scared to drive it

Vonhanson 07-08-2011 09:23 AM

then go buy a reader, you'll have it for the future then and will help save money by not replacing parts that don't fix the problem.

my 70 some dollar UltraGauge reads codes. you should just pick one of those up, plus you can monitor different readings all at once.

hurley 07-08-2011 11:27 AM

got my codes read. the guy at the auto parts store said its my EGR valve or a vacuum leak. i bought a new EGR valve and will be putting that in today.

hurley 07-08-2011 01:02 PM

2 Attachment(s)
so it was the EGR valve. there was something jammed in it holding it open.
side hole
Attachment 80145
bottom hole
Attachment 80146

Timberwolf 07-08-2011 04:48 PM

Wirelessly posted (Timberwolf)

Hell yeah bro.....so is she alive and running? Long way from injector problems huh. Good to here you found the culprit.

hurley 07-08-2011 07:34 PM

she is running great! i didnt know the EGR valve could f up the truck that bad. its the first time the truck has been running correcty since i got it (long story).

Kris03 07-11-2011 06:16 PM

newbie here but whats a EGR Valve?

hurley 07-11-2011 06:33 PM

Give me two minutes and ill go take a pic

hurley 07-11-2011 06:41 PM

2 Attachment(s)
Attachment 80000
Attachment 80001

Kris03 07-11-2011 07:00 PM

oh i seen that before ha..any idea what it does? or how that happened to you?

hurley 07-12-2011 04:42 AM

in the first pic you can see the "EGR Tube" (pipe which runs from the valve to the block). the guy who owned the truck before me had a hole in it which is not good. he decided to try to weld it closed (which didnt work), a piece of the weld broke off and got jammed in the valve holdoing it open. im no 100% on what its function is, something to do with your fuel to air ratio or exhaust or something along those lines.


All times are GMT -6. The time now is 03:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands