Hi All, i had a cam belt failure, caused damage to values etc, so had head done at engineering shop.
Also refurbished injector pump, fitted 4 injectors(tested and verified ok), replaced copper washers at bottom of injectors and the injector seals.
On start up noticed small oil leak at base of back injector(closest to cab).
We removed the injectors and re-seated the seals, then refitted injectors.
On start up everything ok till we revved, then oil spewing out at base of all four injectors.
Need help please- what can be wrong?

regards
jcr

 

Welcome to the forum

You are located in South Africa, so your Ranger is not the same as ours, we call your Model a T6 International Ranger and they are not available here
Yours is larger and uses different engines that we have here in North America

So we won't be of much help

Try this South African forum: 4x4 Community Forum

You also will need to include
Year of vehicle
Make, Ford Ranger?
Engine size
Diesel or gasoline

And sometimes 2WD or 4x4 matters

 

thanks every so much RonD - will try the SA forum