Hey sorry for my english :) I'm from Poland
Could you sent me schematic/ pinout of 42 plug.
My car is from 1995 explorer 2
Here's a photo of the plug.


Need control signals from injectors and RPM signal.
I know i can get it from this plug.
I find something similar
https://www.ranger-forums.com/attach...ranger-pcm.png

Bad quality but something like this

 

Tachometer RPM signal is on the wire that is color coded tan w/yellow stripe.

Injector control wires do not pass through the 42-pin. They are wired directly from the PCM to the injectors.

Sorry, I do not have the correct schematic for your Explorer 42-pin.

 

O thank you very much. So i don't need 42 pin.
I need PCM pin out. I saw that for SOHC engine but i have ohv.

What does it mean " tan w/ "
yellow stripe i understand but wherer in this big 42 pin plug ?

 

Sorry, w/ is shorthand abbreviation for "with".

tach wire = tan wire insulation color with yellow stripe

I don't have the correct schematic book for a 95 Explorer. However, I do have 95 Ranger and 96 Explorer. Both show the tan/yellow in pin position #2 of the 42-pin connector.

 

thanks , i got something like this from other plug

all signals and plus injectors
for RPM signal i will try this yellow like you said
I was wrong. Injector signals is in 60 pin plug PCM