New plans, new attitude...
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
Yeah the E85 thing and a carb ur right on that. And for the record if u go back and look at some questions that i asked and NEVER got an answer for and I quote"What Compression should I use?" and to Takeda, I never said I was an expert, or a legend or anything like that? I did recall saying a few Moments ago that I am a little confused about that. I did ask for some tech help and Takeda responded in this fasion: I think ur Ideas are B.S. Just like ur Tornado!!! I asked numerous times for some ideas, options, and I did say I was confused ealier on. So as far as looking like a fool. better to look one than to sound like one. Keep that in mind Takeda. The more U stir crap the worse it stinks.
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
Hey He started it with a rude comment and I was assuming that they were correct. so if I am wrong no big deal.I was just stating what I read. hello.Go to the VERY BEGINNING OF THIS THREAD AND READ FROM THE BEGINNING. SEE HOW MANY TIMES I ASKED THIS QUESTION, AND I'M ASKING IT AGAIN. WHAT COMPRESSION RATIO SHOULD I USE? Do u think I am planning on doing anything to my truck without some "RESEARCH FIRST?" I'll answer this one very quickly with one word. NO. Jesus H Christ!
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
Level I Supporter
Joined: Aug 2006
Posts: 3,657
Likes: 9
From: Durham, NC
Level I Supporter
Joined: Aug 2006
Posts: 3,657
Likes: 9
From: Durham, NC
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
I was planning on it. But wasn't sure. Like i said i was assuming they were correct and quoting what I had read. But If I seemed like I knew it all, my fault for using the wrong words. My apologies. I really didn't fall for it, i exp'ed with it. It failed miserably. I just never took the time to remove it, to tell u the truth I had forgotton about till just recently. The reason the Tornado is gone, My air intake hose had a huge a$$ hole in it and i replaced it and that is when I remembered it. U said Scat makes that stroker kit I'm looking for? do U have a website? Let's all take a deep breath here and relax a bit.
Level I Supporter
Joined: Aug 2006
Posts: 3,657
Likes: 9
From: Durham, NC
I was planning on it. But wasn't sure. Like i said i was assuming they were correct and quoting what I had read. But If I seemed like I knew it all, my fault for using the wrong words. My apologies. I really didn't fall for it, i exp'ed with it. It failed miserably. I just never took the time to remove it, to tell u the truth I had forgotton about till just recently. The reason the Tornado is gone, My air intake hose had a huge a$$ hole in it and i replaced it and that is when I remembered it. U said Scat makes that stroker kit I'm looking for? do U have a website? Let's all take a deep breath here and relax a bit.
Here is your 1st thread, and right away you were arguing on how great the Tornado is:
https://www.ranger-forums.com/forum2...ad.php?t=58358
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
Do U have a website?! Please tell me U do? And to answer ur question a bit earlier, Yes I did try the tornado and it failed. Just never got around to removing it, and to tell the truth I had forgotton about it until recently when I replaced the air intake hose for another. The Scamado is still in that old broken hose in a dumpster somewhere out there. And quite frankly good ridance. And for the record I wasn't the only one either. U guys make it sound like All people who fell for the tornado are idiots. They had a good scam going.
They had major corporations,manufacturers, and others backing them on infomercials. Look how long it's been out, and look at the time frame between that and when everyone discovered it was a scam. The scam has been exposed, but alot of places still carry it to an extent. They should change it to scamado.
They had major corporations,manufacturers, and others backing them on infomercials. Look how long it's been out, and look at the time frame between that and when everyone discovered it was a scam. The scam has been exposed, but alot of places still carry it to an extent. They should change it to scamado.
Level I Supporter
Joined: Aug 2006
Posts: 3,657
Likes: 9
From: Durham, NC
Member
Joined: Feb 2007
Posts: 185
Likes: 0
From: Brooklyn Park, MN
www.scatenterprises.com
The problem with you is you say you know what you are talking about, but you don't. Don't be a ***** to start, and we will be nice. Stop with the crap.
You fell for an advertisment. The rest of us with mechanical knowledge already knew that wouldn't work (tornado) Don't be a DA. Just listen.
The problem with you is you say you know what you are talking about, but you don't. Don't be a ***** to start, and we will be nice. Stop with the crap.
You fell for an advertisment. The rest of us with mechanical knowledge already knew that wouldn't work (tornado) Don't be a DA. Just listen.
Here...i'll try and livin' things up.....
I was very entertained by the 2 hour long Tornado infomercial.
imo.....someone who knows their ****, should know what compression to run. Ok...i'm done. I'm off to watch Nopi Tunervision.....
I was very entertained by the 2 hour long Tornado infomercial.
imo.....someone who knows their ****, should know what compression to run. Ok...i'm done. I'm off to watch Nopi Tunervision.....
Member
Joined: Feb 2007
Posts: 185
Likes: 0
From: Brooklyn Park, MN
I'd agree on the compression statement. This guy has no clue what he is talking about. I'm fine with people not knowing all this stuff. But, don't be a jerk and act like you know and then tell everyone else off. You won't last long here.
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
Ok kool. keep the cpr stock. Good idea. Swap is on hold. found problem with exhaust this morning. Damn it. And for the record I don't think D. would sell me a damn thing and I assure u the feeling is mutual. He and I don't get along that well. I didn't mean to sound like an expert bcause I aint when it comes to compression ratios, I am in a word green as a gord. The scamado thing was entertaining now that I look back on it. That is what it should be called period, a scam. And yeah people are dumb, I saw 2 guys buy one at autozone this morning. I just shook my head and went outside to smoke and laugh. I can't believe I actually bought that junk almost 4 years ago now. shame on me(L.O.L).
Thread Starter
|
Member
Joined: Feb 2008
Posts: 890
Likes: 1
From: unknown
When I took that scamado junk out of my truck. I could almost hear it say thank you. and It bcame "alive". New exhaust going on monday at 11:am. I'm going with a single in/out Flowmaster American Thunder 40 series with a 2.00 inch pipe instead of 3.00 inch. My friend who is an exhaust expert/guru and installs custom exhaust systems every day gave me a few tips this morning. The first is that my muffler is a good one,but it is too big for my truck. It belongs on a full size instead. secondly he ran a wooden dowl inside the muffler and noticed that it has already burned out sooner than it should have. So basicly it is just a shell now instead of a muffler. he said I have strong valves because usually without back pressure on fuel injected engines it usually "cooks them". He also said that duels usually sound better but for ur truck it wouldn't b a good idead bcause of the engine size is too small for that.
Unregistered User
Posts: n/a
Not happening.
What you COULD do, is have your crank re-ground to accept chevy 5.7inch rods. Tom Morana USED to offer a stroker kit for the OHV 4.0 Ford engine, but I don't believe he does anymore.
The Bore and Stroke for a factory setup is 3.95 x 3.31 inches. You COULD take a set of pistons ( GM or ford ) that are a factory 4.000 size with a different wrist pin location and have them milled down .005 OR a severe hone-ing to your cylinders taking out .005 to make them fit. Balancing the assembly will take MANY man hours and does get VERY expensive. Theres also limited materials between the cylinders to start with, taking it out only causes structural integrity to be compromised.
The bottom end on an SOHC is strong as the oil pan also acts as an engine girdle for the main caps. Its harmonically sound and can hold well to 7 or 8grand on the tac if balanced properly.
For the machine work alone, it would save you TONS of revenue if you can lawfully drop a small block into your truck ( IE: Your states emissions laws ). Theres no guesswork and many examples out there to follow. All the ' answers ' are sitting there . Everything from a carbed 255 to a KenneBell 2.2 twinscrew 351windsor has been done.
What you COULD do, is have your crank re-ground to accept chevy 5.7inch rods. Tom Morana USED to offer a stroker kit for the OHV 4.0 Ford engine, but I don't believe he does anymore.
The Bore and Stroke for a factory setup is 3.95 x 3.31 inches. You COULD take a set of pistons ( GM or ford ) that are a factory 4.000 size with a different wrist pin location and have them milled down .005 OR a severe hone-ing to your cylinders taking out .005 to make them fit. Balancing the assembly will take MANY man hours and does get VERY expensive. Theres also limited materials between the cylinders to start with, taking it out only causes structural integrity to be compromised.
The bottom end on an SOHC is strong as the oil pan also acts as an engine girdle for the main caps. Its harmonically sound and can hold well to 7 or 8grand on the tac if balanced properly.
For the machine work alone, it would save you TONS of revenue if you can lawfully drop a small block into your truck ( IE: Your states emissions laws ). Theres no guesswork and many examples out there to follow. All the ' answers ' are sitting there . Everything from a carbed 255 to a KenneBell 2.2 twinscrew 351windsor has been done.
