New plans, new attitude...
Unregistered User
Posts: n/a
I found a new roller rocker company. They're Called Scorpion Performance. I haven't contacted them yet but I am hoping that they'll have what I am looking for. Crane Cams wins. They have alot of profiles to choose from and I have decided to use a carb instead of fuel injection, but it will be alot of work involved. What would be the best thing to do in switching from Fuel Injection to a carb? Hey Dayno Jaye, please feel free to jump in here please. If u have any input at all on this would be extremely helpfull. Thanks. I am going to use 10.5:1 compression ratio. Also I am having trouble finding a rotating assembly too please help? Thanks to all that can.
What engine are you using? Theres NO 4liter ford engine that uses a carb. One has overhead cams and needs timing triggers.. how would you hook up a carb without some F.A.S.T. or EM-TEC3 setup which would also require a means of measure from external sources and NOT be able to control much of anything?
I'm sorry man, but your posts make NO SENCE what so ever.
Unregistered User
Posts: n/a
Unregistered User
Posts: n/a
U only retard the timing for superchargers, and turbos.
From sitting at a stop sign to flooring your gas and getting up to 60mph in ANY vehicle your timing WILL change +/- a certain number of degrees in EVERY car/truck. It sometimes does it at idle when you first start your car/truck. This even happens on EFI autos as well!
I can't believe I'm reading this...
plus u didn't hear the words flex fuel either. Go to this site and see the octane level urself if U don't believe me. www.e85machines.com . I may not have to bother with the timing. it is rated at about 116 octane.
Unregistered User
Posts: n/a
Hey He started it with a rude comment and I was assuming that they were correct. so if I am wrong no big deal.I was just stating what I read. hello.Go to the VERY BEGINNING OF THIS THREAD AND READ FROM THE BEGINNING. SEE HOW MANY TIMES I ASKED THIS QUESTION, AND I'M ASKING IT AGAIN. WHAT COMPRESSION RATIO SHOULD I USE? Do u think I am planning on doing anything to my truck without some "RESEARCH FIRST?" I'll answer this one very quickly with one word. NO. Jesus H Christ!
Bob.. you and I normally don't get along ( Gay arsed Nikon owners!
) but you have to admit.. when all walks of life are scratching their collective heads , saying ' What the bloody hell is he talking about? ' , it does become rather entertaining.
Unregistered User
Posts: n/a
I would also info you theres NO WARRENTY as I have NO CLUE as to how quick you would wreck it. I could see you calling and me having to say :
"Remember, the accessory belt goes towards the GRILL, not the firewall!"
Anyone just spit their drink on their screen? Keyboard?

In all seriousness, call super-6 motorsports.. http://www.supersixmotorsports.com/ or 478-256-7766. They will have some answers/ideas to go from.
Long Rod 4.3 Stroker: $7300, $450 core
Long Rod 3.8: $7100, $350 core
Forged Piston 4.2 Stroker: $6800, $350 core
Forged Rod/Forged Piston 3.8: $6450, $350 core
http://www.supersixmotorsports.com/p...Shotblocks.pdf
Cheaper to go with a smallblock.
Last edited by D.; Feb 23, 2008 at 12:57 AM.
Just a quick question..
What engine are you using? Theres NO 4liter ford engine that uses a carb. One has overhead cams and needs timing triggers.. how would you hook up a carb without some F.A.S.T. or EM-TEC3 setup which would also require a means of measure from external sources and NOT be able to control much of anything?
I'm sorry man, but your posts make NO SENCE what so ever.
What engine are you using? Theres NO 4liter ford engine that uses a carb. One has overhead cams and needs timing triggers.. how would you hook up a carb without some F.A.S.T. or EM-TEC3 setup which would also require a means of measure from external sources and NOT be able to control much of anything?
I'm sorry man, but your posts make NO SENCE what so ever.
That's ur opinion. I was wanting to switch to a carb but the engine harness would have to be changed and have decided not to do that. I already have done some work with the throttle body. machined a spacer for it if ur wondering. That is about the only machining I can do. It helped some. The engine is a stock 3.0 from the factory. The other thing that help performance wise especially on the bottom end was switching from 3.55 ratios and stock housing to a Ford 9 in housing with 4.10 ratios. That really helped. so will the new C.A.I system i am still building. I am using a "Track use only" air filter. I just wanted to know if I can stroke a 4.0 to a 4.3 liter V6. hey so Tom Morana parts work in usa vehicles then don't they? emmission laws have nothing to do with My vehicle getting a V8 swap either. My state says that the frame can't handle the power of a V8 engine. I call that B.S.. Tom Morana moved his establishment to Canada. The swap is post poned for now until I get this exhaust bit and a few others taken care of.
Sure I would! Its your money going into my pocket. Not only am I the sites Official *****, I'm a lover of Capitolism!
I would also info you theres NO WARRENTY as I have NO CLUE as to how quick you would wreck it. I could see you calling and me having to say :
"Remember, the accessory belt goes towards the GRILL, not the firewall!"
Anyone just spit their drink on their screen? Keyboard?
In all seriousness, call super-6 motorsports.. http://www.supersixmotorsports.com/ or 478-256-7766. They will have some answers/ideas to go from.
Long Rod 4.3 Stroker: $7300, $450 core
Long Rod 3.8: $7100, $350 core
Forged Piston 4.2 Stroker: $6800, $350 core
Forged Rod/Forged Piston 3.8: $6450, $350 core
http://www.supersixmotorsports.com/p...Shotblocks.pdf
Cheaper to go with a smallblock.
I would also info you theres NO WARRENTY as I have NO CLUE as to how quick you would wreck it. I could see you calling and me having to say :
"Remember, the accessory belt goes towards the GRILL, not the firewall!"
Anyone just spit their drink on their screen? Keyboard?

In all seriousness, call super-6 motorsports.. http://www.supersixmotorsports.com/ or 478-256-7766. They will have some answers/ideas to go from.
Long Rod 4.3 Stroker: $7300, $450 core
Long Rod 3.8: $7100, $350 core
Forged Piston 4.2 Stroker: $6800, $350 core
Forged Rod/Forged Piston 3.8: $6450, $350 core
http://www.supersixmotorsports.com/p...Shotblocks.pdf
Cheaper to go with a smallblock.
Unregistered User
Posts: n/a
Well D.,
That's ur opinion. I was wanting to switch to a carb but the engine harness would have to be changed and have decided not to do that. I already have done some work with the throttle body. machined a spacer for it if ur wondering. That is about the only machining I can do. It helped some. The engine is a stock 3.0 from the factory. The other thing that help performance wise especially on the bottom end was switching from 3.55 ratios and stock housing to a Ford 9 in housing with 4.10 ratios. That really helped. so will the new C.A.I system i am still building. I am using a "Track use only" air filter. I just wanted to know if I can stroke a 4.0 to a 4.3 liter V6. hey so Tom Morana parts work in usa vehicles then don't they? emmission laws have nothing to do with My vehicle getting a V8 swap either. My state says that the frame can't handle the power of a V8 engine. I call that B.S.. Tom Morana moved his establishment to Canada. The swap is post poned for now until I get this exhaust bit and a few others taken care of.
That's ur opinion. I was wanting to switch to a carb but the engine harness would have to be changed and have decided not to do that. I already have done some work with the throttle body. machined a spacer for it if ur wondering. That is about the only machining I can do. It helped some. The engine is a stock 3.0 from the factory. The other thing that help performance wise especially on the bottom end was switching from 3.55 ratios and stock housing to a Ford 9 in housing with 4.10 ratios. That really helped. so will the new C.A.I system i am still building. I am using a "Track use only" air filter. I just wanted to know if I can stroke a 4.0 to a 4.3 liter V6. hey so Tom Morana parts work in usa vehicles then don't they? emmission laws have nothing to do with My vehicle getting a V8 swap either. My state says that the frame can't handle the power of a V8 engine. I call that B.S.. Tom Morana moved his establishment to Canada. The swap is post poned for now until I get this exhaust bit and a few others taken care of.
http://leg1.state.va.us/cgi-bin/legp...cod+TOC4602000
Again, don't post anything to me or even mention my name. You have problems that I don't wish to be related to.
You know nothing about engines and nothing about the laws in your state in regards to it.
In fact, you probably didn't even know that all of section 2703 of Title 46 in your state was repealed by Acts 1997, c. 117. You can put ANY engine in your truck so long as its the same model year or newer and carries the OEM emissions systems.
Did you just learn something? WoW!
If I can find such in less then 5 minutes of looking, and I don't even live in YOUR state, why is it you live there and are clueless as to what you can or cannot do?
Your full of it once more.
"My state says that the frame can't handle the power of a V8 engine."
I *would* ask you to show us all WHERE your states doctrine/legislature has ratified such into law, thus making it ' illegal '.
Don't bother answering, don't reply, just go away.
Unregistered User
Posts: n/a
And I'm 100% honest as well. Thus when I tell you outright your full of fectal matter and 100% clueless, folks will know it for the truth as well.
I don;t want anything from you that helped in your creation.
THATS GREAT! And you did all of what you have mentioned without even being able to construct ONE proper sentence? Tell us all this isn't the obvious!
ROFLMAO!
You can state such as its a title that was GIVEN to me by another user here. Its a privy to have such. You might not like what I have to say but its the 100% honest truth. I don't sugar coat anything. I'm the same in real-life as well.
I don't have to, you do it well enough on your own. Need an example?
You said you were 33. At best ( this is SIMPLE math, hope you can keep track of whats going on here.. ) you COULD have 17 years of driving experience.
Biologically, I'm more then capable of being a contributor to the detrement of society by saying I'm old enough to be your father, but would have done the honorable thing in killing myself off if such were the case.
How many times has someone asked if you were a reason abortion should be kept legal?
If you want a battle of witts, Please come armed.
I went to Nascar tech and got the privelage of doing things down there i thought i never would get to do. I still wouldn't buy or even sell U a terd.
And as far as wrecking it? I don't think so. I drove 18 wheelers for a living 9 years solid, The last company I drove for was Fedex and I have about 5 certificates from the U.S.D.O.T, and Log Books, and tax documents that proove I drove an 18 wheelers for a living.
U probably don't even know how shift without the clutch.
Yes I did get to work on a few race cars. I never did design any of them. Ur are beyond a shadow of a doubt the biggest ***** in here.
And for the record, don't make me out to be dumb.
I AM NOT. I was driving b4 u were even a thought.
Biologically, I'm more then capable of being a contributor to the detrement of society by saying I'm old enough to be your father, but would have done the honorable thing in killing myself off if such were the case.
How many wrecks have u had on the street d.? I have had none on the street.
If you want a battle of witts, Please come armed.
Hey *** monkey, Do u live in VA? no bcause if u did live near me you'd be dead U son of a b****. Leave me the hell alone u sorry bastard. And do u put state inspection stickers on down here? No. here's what they said, yeah u can do a V8 swap but good luck getting an inspection sticker for it. They will no longer pass inspection down here a$$hole. OBD 3 is around the corner. and if abortion was legal and I was around when u were expected, I'd made damn sure u were abort U brainless, D***wad. Do u make laws down here? yeah u try to title a V8 s10 down here, or a 302 ranger and see what the DVM for the state of VA will tell u. Shut the F*** Up u dumb *** Son of a B****. Don't even reply, don't send me an email, don't even breathe in my direction U old bastard.
Hey *** monkey, Do u live in VA? no bcause if u did live near me you'd be dead U son of a b****. Leave me the hell alone u sorry bastard. And do u put state inspection stickers on down here? No. here's what they said, yeah u can do a V8 swap but good luck getting an inspection sticker for it. They will no longer pass inspection down here a$$hole. OBD 3 is around the corner. and if abortion was legal and I was around when u were expected, I'd made damn sure u were abort U brainless, D***wad. Do u make laws down here? yeah u try to title a V8 s10 down here, or a 302 ranger and see what the DVM for the state of VA will tell u. Shut the F*** Up u dumb *** Son of a B****. Don't even reply, don't send me an email, don't even breathe in my direction U old bastard.
Unregistered User
Posts: n/a
And do u put state inspection stickers on down here? No.
Can you imagine that!
here's what they said, yeah u can do a V8 swap but good luck getting an inspection sticker for it.
They will no longer pass inspection down here a$$hole.
OBD 3 is around the corner. and if abortion was legal and I was around when u were expected, I'd made damn sure u were abort U brainless,
"I'd made damn sure u were abort U brainless"
One doesn;t need to have a ' brainnless abortion ' to be brainless. Thanks for the example.
D***wad.
Do u make laws down here?
Need to pass the Bar exam this fall or the following spring first though.
yeah u try to title a V8 s10 down here, or a 302 ranger and see what the DVM for the state of VA will tell u.
Shut the F*** Up u dumb *** Son of a B****.
Don't even reply, don't send me an email, don't even breathe in my direction U old bastard.
OH YEAH, you reported me for calling you names? ROFLMAO!
Heres something YOU need to think about BEFORE you appologize and take a sabatical from here ( yes, you WILL leave )..
Its one thing to toss around names, but another to openly threaten someone. If I didn't care for the administrators or mods here ( the folks whom you cried to, then committed the act of what you cried about ), I COULD just print off what you said and stop by the local authorities.
This is where things get interesting.. and FUN!

From your own states laws..
-->
Virginia Stalking Law
18.2-60. Threats of death or bodily injury to a person or member of his family; threats to commit serious bodily harm to persons on school property; penalty.
A. 1. Any person who knowingly communicates, in a writing, including an electronically transmitted communication producing a visual or electronic message, a threat to kill or do bodily injury to a person, regarding that person or any member of his family, and the threat places such person in reasonable apprehension of death or bodily injury to himself or his family member, is guilty of a Class 6 felony.
2. Any person who communicates a threat, in a writing, including an electronically transmitted communication producing a visual or electronic message, to kill or do bodily harm, (i) on the grounds or premises of any elementary, middle or secondary school property, (ii) at any elementary, middle or secondary school-sponsored event or (iii) on a school bus to any person or persons, regardless of whether the person who is the object of the threat actually receives the threat, and the threat would place the person who is the object of the threat in reasonable apprehension of death or bodily harm, is guilty of a Class 6 felony.
B. Any person who orally makes a threat to any employee of any elementary, middle or secondary school, while on a school bus, on school property or at a school-sponsored activity, to kill or to do bodily injury to such person, is guilty of a Class 1 misdemeanor.
A prosecution pursuant to this section may be either in the county, city or town in which the communication was made or received.
(Code 1950, § 18.1-257; 1960, c. 358; 1973, c. 118; 1975, cc. 14, 15; 1994, c. 265; 1998, cc. 687, 788; 2001, cc. 644, 653.)
-->
Now, all I WOULD have to theorhetically do is print off what you have stated, stop by the LOCAL FBI shop. They would then contact the site owner/admins, get your IP address. a NSlookup of it would say whom the provider is..
Well.. I dun went and did all that. Your on Comcasts network off the Danville Hub.
The real question is.. Am I a ' broad ' whom whines and cries and would cause all kinds of troubles for the site owner and see this thing through, or would I rather just say ' F-it ' and ask for you to be deleted?
Heres the difference between you and I.
I would NEVER do such to the folks here. I give my word on it.
My real option/question is ' what to do with this, not to involve anyone but some **** from hicksville and to make him leave here willingly '.
Hmm..
I know your not too bright. I know you probably have failed at just about anything that requires reading and writing, and I don't think your parents would be too happy when your cable modem and their TV's are turned off from the Node they run off of.
Do I need to post here what Comcasts EULA states or their ' terms of service '?
Your probably wondering where I come up with all of this?
Welp. It comes from knowing how to read and being aware of ones surroundings.. its something most human beings develope a sense of over their early years.
I would ask you to just leave the members here without further insult ( I counted over 15 you have insulted for little to no reason in the general forums ), but you believe your knowing of better.
So.. I'm going to start a poll in the ' Offtopic ' remarks. Lets see what the members think, shall we?
Thread
Thread Starter
Forum
Replies
Last Post
Grumpy
OLD - Suspension, Tires, & Wheels
4
Sep 8, 2015 06:44 PM
immortal_vision
Wheels & Tires Semi-Tech
10
Nov 24, 2010 11:29 PM




