4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

oil pressure gauge fluttering

Thread Tools
 
Search this Thread
 
  #1  
Old 05-05-2007
Jordan's Avatar
Member
Thread Starter
Join Date: Mar 2007
Location: Kenai, AK
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
oil pressure gauge fluttering

another issue that has come up within the last few days. my oil pressure gauge will often flutter, from its normal range to nothing.

it does this when:
1. i put the truck in 1st/reverse from a dead stop
2. when i put a moderate load on the engine (RPM doesnt apparently matter, i tested this tonight from 1500 to 3000 RPM).
3. when im idling on an upward slope (idled at taco bell and i found it constantly moved around until i revved it up to 1500, at which it stabilizes)

another oil check is due tomorrow, but other then that im not sure what to do (havent replaced that fram oil filter yet)
 
  #2  
Old 05-05-2007
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
There are 2 likely possibilities:

1) Your truck has a real oil pressure problem and you should not even be starting the engine until it's corrected.

2) Your oil pressure sending switch is defective. This is not that uncommon and it is cheap/easy to fix with a replacement.
 
  #3  
Old 05-05-2007
dlibson's Avatar
Member
Join Date: Feb 2007
Location: Brooklyn Park, MN
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
What he said ^^^

Is the engine making any unusual noises?
 
  #4  
Old 05-05-2007
Jordan's Avatar
Member
Thread Starter
Join Date: Mar 2007
Location: Kenai, AK
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
other then a ticking sound when its first started, it sounds fine
 
  #5  
Old 05-05-2007
Jordan's Avatar
Member
Thread Starter
Join Date: Mar 2007
Location: Kenai, AK
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
just did a run around the block. the oil pressure moves about 1/4 inch above its stopping point, and only (briefly) moved to normal when i got it up to 2500RPM and decelerated in that gear.
 
  #6  
Old 05-06-2007
PW01's Avatar
Member
Join Date: Aug 2004
Posts: 688
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Jordan
other then a ticking sound when its first started, it sounds fine
I think the problem is more serious than your oil sending unit. I would not start the truck until it has diagnosed.
 
  #7  
Old 05-07-2007
Jordan's Avatar
Member
Thread Starter
Join Date: Mar 2007
Location: Kenai, AK
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by PW01
I think the problem is more serious than your oil sending unit. I would not start the truck until it has diagnosed.
i agree. i am now 99% sure its an engine problem. probably shouldnt have drove it, but i did. the ticking sound is still there, and about 5 miles from home the check engine light came on. i took it easy, keeping the RPM low, but i wont be driving it until i can fix it.
 
  #8  
Old 05-07-2007
5speedin2.3's Avatar
Member
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Jordan
i agree. i am now 99% sure its an engine problem. probably shouldnt have drove it, but i did. the ticking sound is still there, and about 5 miles from home the check engine light came on. i took it easy, keeping the RPM low, but i wont be driving it until i can fix it.
drain the oil and see what it looks like.
put some fresh motorcraft oil and a motorcraft filter on it and see if its still there.
also get us the code from the check engine light.
 
  #9  
Old 01-05-2015
SGL1's Avatar
Member
Join Date: Aug 2011
Location: Spring, TX
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
I know I have one or multiple oil leaks on my 3.0 v6 and lately my gauge has been fluttering as well. I believe it is sending unit as there is oil in motor and no noises. The behavior is erratic as well. Sometimes it flutters, sometimes it doesn't. Then it's not the same either. Sometimes it goes ballistic but mostly it goes erratic at idle to low mark then when I give it gas it pops back to midrange.

Believe it's sending unit but how to check?
 
  #10  
Old 01-07-2015
PORSCH3XX's Avatar
Member
Join Date: Dec 2014
Location: harrison Tn.
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
I have a 98 3.0 my gauge was doing the same thing, than lost oil pressure and top of engine started rattleing, bad oil pump. thanks, Steve
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
$tone02
4.0L OHV & SOHC V6 Tech
3
08-28-2006 12:35 AM
travis8798
General Technical & Electrical
7
08-26-2006 12:40 PM
buddytoo
SOHC - 2.3L & 2.5L Lima Engines
10
08-17-2006 10:48 PM
ranger4x2
2.9L & 3.0L V6 Tech
13
02-13-2006 08:10 AM



Quick Reply: oil pressure gauge fluttering



All times are GMT -6. The time now is 11:03 PM.