This my frist post on here.

I'm a little lost on what to do next.
I done a tran swap from a auto trann to a 5 speed. The wiring harness am using is # 12B637. I have the eng wire but i dont know if i need to change the wiring harness from the c110 plug to the in cab wiring harness also?
I'm looking for help on finding digram on a pcm pinout with the wiring digram for 2003 ford ranger 4.0 SOHC. I'm having trouble on a wire that is pin number 82 at the pcm its bk/wh wire.
I know its for "check fuel cap". i can't find a pinout digram for it. The other wiring harness that is original harness i put the 5 speed trann in dont have that pin #82 1017 Bk/Wh wire.
any help would be nice

 

Checking in the Haynes manual. It doesn't show a pin #82 on the PCM. Maybe not every truck had it? Sorry I couldn't help.

 

Welcome to the forum

Pin 82 on PCM goes to instrument cluster C220B pin 10, it is for the "Check Fuel Cap" light, it would be activated if EVAP system showed a leak
Yes it is a black/white stripe wire

Found this on library site, it had no choice between manual and automatic, which it often does when the wiring is different