EGR 01 Explorer 5.0
#1
EGR 01 Explorer 5.0
Well, fininshing up the last few things on my swap. My EGR line and fitting is all screwed up though, threads messed up and everthing siezed together. I think I'm gonna buy new so I can take it on and off without twisting the whole thing.
I found the line and the valve on RockAuto for about 65 dollars for the pair, no nut tho (the nut that connects the line to the maniford). I'm not sure where to get the nut, possibly the Ford dealer. Any ideas or suggestions are welcome.
Thanks.
I found the line and the valve on RockAuto for about 65 dollars for the pair, no nut tho (the nut that connects the line to the maniford). I'm not sure where to get the nut, possibly the Ford dealer. Any ideas or suggestions are welcome.
Thanks.
#4
#5
#7
I've heard of those companies before but I thought they were stricktly for V6 and I4 rangers. Didn't know they could tune a V8. I'll have to look into it.
#9
Member
iTrader: (2)
Join Date: May 2008
Location: Watson, Louisiana
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
Look local too. Buying a tune off of the interent also means not getting top results performance wise. I have a local guy, thats known all across the south for tuning mustangs doing mine. I can't remember what he called the program he is using, but he has to cut out the back of my computer casing, and add a chip to the mother board that will stick out the back out the computer. Then, once I work out any bugs and leaks I will go back to his shop and dyno tune, He will pull it until he is satisfied with the outcome.
I'll update you monday on what the program he is using is called. That's when I pick up the computer.
I'll update you monday on what the program he is using is called. That's when I pick up the computer.
#10
Ok, so the v8 has been in and running for a few weeks now and i have a few hundred miles on it. So far it has ran "ok". It runs great driving down the road but has a lopey idle, kinda like it has a semi agressive cam in it. It sounds awesome but I know it has the factory cam and it should not act like that. I scanned it today at work and other than the trans, pats, and air bag codes, I got these:
Fuel pump secondary circuit high
EGR flow excessive
I'm starting to think I have an intake leak somewhere. Anyone have any experiance with these codes or ideas of how to make it idle like it should? I think I'll start with a can of carb cleaner and search for an intake leak.
Fuel pump secondary circuit high
EGR flow excessive
I'm starting to think I have an intake leak somewhere. Anyone have any experiance with these codes or ideas of how to make it idle like it should? I think I'll start with a can of carb cleaner and search for an intake leak.
Thread
Thread Starter
Forum
Replies
Last Post
skillzo1
OLD - Engine & Drivetrain
5
01-17-2012 01:27 PM
topofffun
OLD - Suspension, Tires, & Wheels
4
03-12-2010 10:33 PM
lifted97ranger
General Technical & Electrical
10
12-20-2006 03:29 PM