Heads
#1
Heads
Ok I have been looking for heads for my 5.0 Mustang and I know this is a Ranger site but people get the 5.0s. I am looking for the GT-40 heads and my understanding below a 97 has the GT-40 and above has the GT-40P. I am wanting to know which ones are better and if there are anymore parts from the explorer 5.0 that I could use to build my motor for cheap, thanks alot. Explorerforum no one has replied in days.
#2
96/7' use GT40's, the same as Cobra GT40 heads, mild improvement over E7's and you don't need to use special headers.
98'+ use the GT40Ps, they bump the compression slightly, have better plug location for better combustion and do make a bit more power/flow more than GT40's. You need GT40-P specific headers to use these heads and new plug boots on the wires.
As for other stuff, the upper and lower intake from Explorers are an upgrade from stock Mustang intakes as well. They flow almost identical to Cobra and tubular intakes which cost $100's more, but you do need to configure the EGR to your application.
I can dig up some links on this later, but here is a Mustang site that you should check out for some more/better detailed info: Corral
98'+ use the GT40Ps, they bump the compression slightly, have better plug location for better combustion and do make a bit more power/flow more than GT40's. You need GT40-P specific headers to use these heads and new plug boots on the wires.
As for other stuff, the upper and lower intake from Explorers are an upgrade from stock Mustang intakes as well. They flow almost identical to Cobra and tubular intakes which cost $100's more, but you do need to configure the EGR to your application.
I can dig up some links on this later, but here is a Mustang site that you should check out for some more/better detailed info: Corral
Thread
Thread Starter
Forum
Replies
Last Post
Prerunner-Ranger
OLD - Engine & Drivetrain
3
09-12-2020 06:46 AM
Want to Trade: Black Heads/Corners for 06+ OEM Heads/Corners (NorCal)
2004xlmiller
OLD - Interior, Exterior, Electrical, & Misc.
7
06-05-2012 10:03 PM
Lefty04LevelII
General Ford Ranger Discussion
16
12-22-2005 04:47 AM
Ranger1
4.0L OHV & SOHC V6 Tech
6
05-26-2005 06:59 AM