any one have long tube headers on a 302 in a 94 ranger. im wanting to install some afr 185 but it says the exhaust port is raised .125. i need to know if my headers will still work?

 

185 exhaust ports are stock, 205 and 225's are raised...

 

i talled to them and i think i will do the 205 heads when i do them. it has raised ports but its only .125 higher. im looking at doing a 347 with around 13:1 comp with the 205 heads.

 

I am looking into doing a v8 swap as well but I can't find any 1 5/8" primary tube headers and I don't know if I can make my own I have never really welded much.
also if you are going to run 205 afr heads you are going to want an 1 3/4" primary header or you might as well put 165's on it

 

i was thinking if i do it have custom headers made for it so i can go to a bigger tube.

 

http://http://fordpowertrain.com/FPAindex/429%20460%20Shorty.htm
I think a header shaped something like this would work good but this place doesn't carry headers for the ranger swap