memphis belle
#1
04-29-2007
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
memphis belle
are they worth it?
im thinking about getting one once i get a job.
im applying for a job at best buy as a mobile audio installer until i get a job as a journeyman electrician. (about 3 months)
what are good brands that make good component door speakers?
im going to have to get a cap and a better alt, my lights dim as it is already.
could be the fact that i have the ORIGINAL battery?!?...
the one im looking at is a 5chan.
MCH1300
RMS Power 4 Ohms Stereo Ch 1-4/Ch 5 (4 ohms Mono) 14.4V
75x4/300x1
the 300watt channel will push my memphis 8" sub, should be fine, the sub is 200x2 watts max.
and the 75x4 will push my kenwoods until i can get some components for the doors. (the kenwoods can stay in the back)
my current setup is in my sig and i love the way it sounds, i just think the kenwood amp for the door speakers is on its way out. (it smells really bad when i turn it up loud for over 5min.
im thinking about getting one once i get a job.
im applying for a job at best buy as a mobile audio installer until i get a job as a journeyman electrician. (about 3 months)
what are good brands that make good component door speakers?
im going to have to get a cap and a better alt, my lights dim as it is already.
could be the fact that i have the ORIGINAL battery?!?...
the one im looking at is a 5chan.
MCH1300
RMS Power 4 Ohms Stereo Ch 1-4/Ch 5 (4 ohms Mono) 14.4V
75x4/300x1
the 300watt channel will push my memphis 8" sub, should be fine, the sub is 200x2 watts max.
and the 75x4 will push my kenwoods until i can get some components for the doors. (the kenwoods can stay in the back)
my current setup is in my sig and i love the way it sounds, i just think the kenwood amp for the door speakers is on its way out. (it smells really bad when i turn it up loud for over 5min.
#2
04-29-2007
Join Date: Oct 2006
Location: wher ever uncle sam wants
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
i havent gone to the memphis site to verify.. but i thought the memphis belle was 75x4 and 1000x1 the 300x1 could be at 4ohms im guessing?
but all the memphis amps ive used 300/4 mclass and 1100.1 mclass were AMAZING! then someone wanted the 300.4 more than i did and stole it outta my truck, along with some cds/cash/pack of gum/condoms and started pullin at my subs
but all the memphis amps ive used 300/4 mclass and 1100.1 mclass were AMAZING! then someone wanted the 300.4 more than i did and stole it outta my truck, along with some cds/cash/pack of gum/condoms and started pullin at my subs
#4
04-29-2007
Join Date: Nov 2004
Location: Abilene,Texas
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
#5
04-29-2007
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by birdie2000
i have one and love it!!!!!pushed 2 12's in the ranger for a while and now is collecting dust until i can get some stuff for the silverado. you may think about the mch600 that should be enough for one 8.
whats the peek power output?
#7
04-30-2007
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#8
04-30-2007
Unregistered User
Posts: n/a
from a dealer they go for $1100ish on average. i bought one brand new and then came across another one. so long story short i have 2 BNIB M-Class Big Belles which i paid around 1100 for both 600 for one and 500 for the other and i have not finished the fiberglass box for my truck since i may be in the market for another vehicle.
if i find a buyer i will include a bridging module and a bass **** for $650 shipped. the module is needed for the sub input of the amp and it runs about $100 from a dealer and the bass control gain is not needed, but its a nice convenience. that retails for about $75 from a dealer. so you are getting a good deal.
the dimensions are like 24or26X7x2.5
if i find a buyer i will include a bridging module and a bass **** for $650 shipped. the module is needed for the sub input of the amp and it runs about $100 from a dealer and the bass control gain is not needed, but its a nice convenience. that retails for about $75 from a dealer. so you are getting a good deal.
the dimensions are like 24or26X7x2.5
#9
04-30-2007
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by quest51210
from a dealer they go for $1100ish on average. i bought one brand new and then came across another one. so long story short i have 2 BNIB M-Class Big Belles which i paid around 1100 for both 600 for one and 500 for the other and i have not finished the fiberglass box for my truck since i may be in the market for another vehicle.
if i find a buyer i will include a bridging module and a bass **** for $650 shipped. the module is needed for the sub input of the amp and it runs about $100 from a dealer and the bass control gain is not needed, but its a nice convenience. that retails for about $75 from a dealer. so you are getting a good deal.
the dimensions are like 24or26X7x2.5
if i find a buyer i will include a bridging module and a bass **** for $650 shipped. the module is needed for the sub input of the amp and it runs about $100 from a dealer and the bass control gain is not needed, but its a nice convenience. that retails for about $75 from a dealer. so you are getting a good deal.
the dimensions are like 24or26X7x2.5
will that amp be ok with my 8" memphis sub?
#11
04-30-2007
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#13
04-30-2007
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by quest51210
it would only give it 300 watts@4ohms or 600@2ohms. as much as i like to make a sale, this amp would not be good for you if you are running a SVC 4ohm sub. just not worth it IMHO.
it will be a few months before i get one, if i do. (the belle)
MClass 8" Subwoofer
The MClass Subwoofer takes sound quality to the next level. Ideally suited for small, sealed boxes, the MClass subwoofer will generate accurate, deep bass, while remaining flexible enough to work in a variety of enclosures.
Model: 15-MS84
Product Features
* Double roll polypropylene surround
Better control over cone movement
* Carbon fiber cone
Superior strength and rigidity resulting in low distortion output
* Dual flat spiders with graduated rolls
Controls excursion for better power handling and more enclosure versatility
* Single or dual 4 ohm voice coil
For the most versatile amplifier applications, 4 layer winding on 2" KaptonŽ former
* Vented basket and vented spider spacer
Cools the voice coil for better power handling
* Aluminum heatsink
Draws heat away from the pole piece
Specification Summary
RMS/Peak (W) 100/200
Sensitivity (dB) 86
Magnet Size (Oz) 30
Mounting Depth (in) 4
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: memphis audio 5x7s pa
acemavrick
OLD - Interior, Exterior, Electrical, & Misc.
1
09-06-2012 09:37 PM
