Well, my brother left my headlights on my truck for a good 4 hours, by the time I got to my truck it was completely dead.

Luckily, the battery was brand new, so it was too big a problem to jump start it.

Ever since then my radio is hay-wired. The clock button, that use to bring up the clock, or turn the clock off, now is a programmed station button. I can't eject my CD thats in there, and all the other buttons are royally screwed as well.

Luckily I've been able to program one button for a radio station, so I at least have one radio station to listen to atm, for sanity.

Any tips?

I've removed the radio from direct power, pulled the NEG attachment of the truck off the battery to reset everything, still doesn't work. This radio DOES NOT have any battery back up, so every time power is stopped to it, it resets.

I plan on looking to see if I registered the product when I bought it, and if I still have the receipt. It's been several months since I bought it, but hopefully still covered under warranty.

I've also removed the face plate, and re-attached the face plat, nothing.

Well, that day wasn't good for my brother, he's 15, wanting to learn how to drive, I had him out at a farm, teaching, and he ended up busting a water pipe while weed whacking that day too, so I didn't digg'em too much for the radio.

 

there should be a reset button on that faceplate or behind it

 

10-4 will search for it.

 

Unable to find reset button, in manual or on the radio front.