Sub wiring help
Sub wiring help
ok so im going over all the connections and whatnot and what wires goe where and i only dont understand one thing...so the RCA cable comes from the back of the cd player and it plugs into my input jacks on the back of the amp? what does the RCA cable do exactly? what plugs into the pre-out jacks on the back of the amp? something that needs to be plugged into the back of the cd player also? thanks
i dunno exactly what RCAs do but you got a set of black and red out the back of the player to the input of the amp
power wire on one side of vechile..make sure you run the RCAs on the opposite side of the power..
inline fuse on power
good ground
remote wire then should be good to go...
power wire on one side of vechile..make sure you run the RCAs on the opposite side of the power..
inline fuse on power
good ground
remote wire then should be good to go...
Rca comes out of pre outs on the back of the cd player, plug into the the amp rca input outlets, the the pre out on the amp are sendint another set of rca to another amp if you have to send another signal.....
i guess i dont understand the whole wiring thing at different ohms...i understand that ohms is the resistance in the circuit but why would u want more ohms ?wouldnt that take away from the total current going to the sub? whats the difference between the 4 ohm type r and the 2 ohm one?
No you want less ohm's....if you have a type R in your truck you can wire it down to 0.5 ohm's but i dont think alpine amps really supply under 2 ohm's...what speaker did you get the dual voice 4 ohm or the dual voice 2 ohm.....cause thats going to make the difference on how to wire you sub and all.....
Thread
Thread Starter
Forum
Replies
Last Post
pushdeck
OLD - Interior, Exterior, Electrical, & Misc.
1
May 2, 2010 10:39 AM
crucialcolin
Audio & Video Tech
13
Jun 21, 2008 09:13 PM




