subs and aftermarket hu
hows it goin ranger fam?! Here is my question: I like the factory amp/sub in the 04 edge supercab i just bought but i need more power without losing this setup. If I buy the correct wire harness I should be able to use the amp/sub still right?? also does anyone have any diagrams for a sub box for 2-12" without losing either one of the jump seats and it be removable?? i have a kid and dont want to lose one as i have another one on the way in about a week and will eventually have to use both. any help appreciated and btw love the site!!!
I have 1-12 ans had t remove the jump seat on the driver's side to get more room for the occasional 3rd person in the passenger's side jump seat. It can be done but Probably not with 2-12s, maybe 2-10s or 1-12 will be better. No need to blow of the newest little one's ears at a young age, lol. A blow through is always an option too.
Sounds like he wants a simple box then, but adding handles like from real sound equipment will help make it more "portable" an amp under the seat and some banana clips instead of bare wire in spring loaded clips might make it easier too.
its gunna be a ***** to get 2 12's in a ranger and you will probly loose the 8 inch in the center. the amp n sub has a separate harness that youd have to splice n cut, but if your gunna have 2 12's its gunna drown it out anyway.
Put in in the bed and cut some holes!!
I seen a really nice yota with everything mounted in toolbox and ported to the cab.
It was sick
Here it is.
http://www.customtacos.com/forum/sho...d.php?p=371705
I seen a really nice yota with everything mounted in toolbox and ported to the cab.
It was sick
Here it is.
http://www.customtacos.com/forum/sho...d.php?p=371705
I think this setup is 2 10s but you can still seat people in the back.
Last edited by whippersnapper02; Oct 1, 2008 at 02:30 PM.
ive got a great down firing box for two 12's but theres no way you will save the jump seats. infact i have to take the passenger seat out just to get that box in there. i dont thinks thats possible unless u got two seperate boxes. i know MTX has really nice enclosures that are made for each car and will fit snug.
Where can i get that setup - BOX - for 1 - 12" thats so flush i fell in love.
its not too hard either. I have absolutely no carpentry skills either. all you need is some MDF, a sawsall or skill saw, and a basic idea of what you want. my box is attached to where the jump seat bolted down. i basically took the seat and jack stand out and built the box into the space i had.
Best vid I have cause my cameras a POS:
http://www.youtube.com/watch?v=5oWDQyb8-Go
All Pioneer equipment. RF is a good brand, but expensive.
Specs:
Pioneer DEH-P4800MP tuner
4 Pioneer 3-way 6x8's
2 Pioneer 3-way 6.5's
2 Pioneer 600W 10" subs in a custom box
Pioneer 760W amp
Sirius Satellite Radio
EDIT:
Found this on my car audio forum.
http://www.caraudio.com/forum/showthread.php?t=232396
Good list to go by.
Last edited by Danger06Ranger; Oct 2, 2008 at 07:41 AM.
but it sounds off at certain hertz the port has to be tuned to a single hert..

i had mine ported but it would only sound good at like 32 hertz everything else sounded off a tennis ball and super glue fixed that.

i had mine ported but it would only sound good at like 32 hertz everything else sounded off a tennis ball and super glue fixed that.
My system isn't ported. I listen to a lot of rock so I want it to sound clean. Even when I play rap it bumps pretty good and it's only one 12. I really don't care that it doesn't vibrate the car next to me. I like hearing and I don't show off.


















