Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

2005 ranger edge trans capacity

Thread Tools
 
Search this Thread
 
Old Jan 14, 2008
  #1  
t gavin's Avatar
Thread Starter
|
Member
Joined: Nov 2007
Posts: 13
Likes: 0
From: crete, il
2005 ranger edge trans capacity

greetings all and happy 2008,
some info please, what is the REFILL capacity for a trans fluid and filter change on a 2005 ranger edge 2WD, 3.0, V-6 motor with an automatic 5 speed O.D. transmission? maintenance guide gives a DRY fill capacity but says nothing about a fluid/filter change capacity. seems like dealers and lube joints always overfill. any and all info is much appreciated, thanks, your fellow ranger, tom
 
Reply
Old Jan 14, 2008
  #2  
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
it can vary......start with 3 quarts and then check the level....fill from there...
 
Reply
Old Jan 14, 2008
  #3  
SB05EDGE's Avatar
Member
iTrader: (1)
Joined: Nov 2007
Posts: 534
Likes: 0
From: Midland, Texas
pulled off of alldata:

NOTE: When filling a dry transmission and converter, start with a minimum of 3.7 liters (4 quarts). With the engine running and the transmission at normal operating temperature 66-77°C (150-170°F) , check and adjust the transmission fluid level and check for any leaks. If fluid is needed, add fluid in increments of 0.24 liter (0.5 pint) until the correct level is achieved (fluid should be in the cross-hatched area of the fluid level indicator).
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BlackRanger04
4.0L OHV & SOHC V6 Tech
17
Dec 9, 2022 02:13 PM
Ftirish86
Drivetrain Tech
2
Oct 18, 2011 10:44 PM
Majck123
4.0L OHV & SOHC V6 Tech
6
Aug 20, 2010 12:14 AM
Goodysgotacuda
Drivetrain Tech
26
Nov 20, 2008 02:46 PM
t gavin
Drivetrain Tech
0
Jan 29, 2008 12:14 PM




All times are GMT -6. The time now is 11:19 PM.