Can you tell me the fluids and quantities required for the '03 Fx4 Level 2 axles. I tried searching but couldn't find it.

 

pulled from
http://www.motorcraftservice.com/pub.../03Ranog3e.pdf

 

put some oil in, stick your finger in, if you can feel the oil level then call it good, if not... then add more...

 

thats how i did mine.

 

That doesn't help him at all with knowing what kind and how much to buy...

 

Chris, thanks, that is exactly what i needed.


It doesn't mention the friction modifier, but I knwo the torsen requires it.

"6Add 118 ml (4 oz.) of Additive Friction Modifier XL–3 or equivalent
meeting Ford specification EST-M2C118–A for complete refill of
Traction-Lok axles."

that is a handy link thanks.

 

yup no problem. I forgot to put the page in about the modifier but I see you found it in the link so all is well.

 

The friction modifier is added to clutch type LSDs like the Ford Traction-Lok to help prevent chatter while turning. Gear type LSDs like the Torsen do not need it.

 

So the friction modifier that the manual states is required for Fx4's is for the regular Fx4's no the level II's with the Torsen's?