Pulls to the right?
#26
RF Veteran
iTrader: (1)
If left wheel brake isn't working then it would pull to the right when braking and could drift right when not braking since there is 0 drag on left wheel.
Front wheels should spin "freely" but there will be some drag because of runout(rotor can't be perfectly flat), and brake pads do touch rotor lightly when brakes are off, this is to keep debris out of pad rotor contact areas.
In earlier post you said right wheel didn't spin freely and when you opened bleeder and retighten it did spin freely, which would point to a pressure release issue.
Front wheels should spin "freely" but there will be some drag because of runout(rotor can't be perfectly flat), and brake pads do touch rotor lightly when brakes are off, this is to keep debris out of pad rotor contact areas.
In earlier post you said right wheel didn't spin freely and when you opened bleeder and retighten it did spin freely, which would point to a pressure release issue.
#27
Thread
Thread Starter
Forum
Replies
Last Post
mattd860
General Technical & Electrical
11
07-01-2011 10:31 AM
Mykhael
General Ford Ranger Discussion
11
10-12-2008 03:25 PM
Bhavesh
General Ford Ranger Discussion
9
10-20-2006 10:23 PM