T-Case/Tranny Seal??
if thats where the t-case mounts to the tranny then just pull the t-case off and clean up both surfaces and use some grey RTV on it to seal it up. there will be a small spot on the bottom of the transmission surface that is open, you need to fill that with a dap of rtv first and let it harden then you will have an enclosed surface to seal the t-case to.
hey, that's where I'm STILL leaking. I'm going into Ford tomorrow to slap them about some. I went in under warranty twice to get it fixed. Third time they told me it was just excess. This will be the fourth time and I've out of warranty (bumper-to-bumper) but now I'm into extended.
Originally Posted by TireIron
if thats where the t-case mounts to the tranny then just pull the t-case off and clean up both surfaces and use some grey RTV on it to seal it up. there will be a small spot on the bottom of the transmission surface that is open, you need to fill that with a dap of rtv first and let it harden then you will have an enclosed surface to seal the t-case to.
Thread
Thread Starter
Forum
Replies
Last Post
1996Ranger4x4SuperCabSTX
General Ford Ranger Discussion
9
Dec 10, 2019 03:07 PM





