Replacing Front Wheel Hubs
#1
#2
On a 4wd the bearing is a sealed unit and houses the abs sensor in it. You have to unbolt the 3 bolts on the back of the spindle and the CV nut to get it off. They are pricey as well since they have the sensor inside them. I haven't done them myself but I have heard they are easy to change.
#3
#5
i just did mine this morning. took about an hour. i did have to use a puller to get the hub off tho. i just put tension on the puller and used a chisel and hammer at the joint. 3 good wacks and it came right off. pretty straight forward in my opinion and this is the fist time i have ever changer a hub. also i used some never seize on the new hub incase i ever have to do it again, and i lubed the caliper sliders while i was in there.
Thread
Thread Starter
Forum
Replies
Last Post
soulrobber
Drivetrain Tech
6
12-06-2018 03:49 PM