well i converted my 00 to an 01+ edge front end...got everything together but removed one of the bulb plugs on each side for the turn signal...now my blinker looks like its on crack...do i just cut the plug off of the left over and tie it in to the plug im currently using??

 

Put the bulb back in and just hide it.

 

You need to post pictures first, then we will answer your question.

 

tried to but i forgot i switchd the resolution on my phone and the fawker wouldnt send to my email...gonna try again tomorrow

where would i hide the extra bulbs? i have no front bumper...electrical tape covering it up??

 

I would just ziptie it to the header panel somewhere, as dry and clear from stuff as possible.

 

leave it un plugged and put an EP27 flasher relay in it

 

Oh the EP27 will fix the hyperflash? Awesome, didn't know that for sure.

OP, you can find the EP27 at autozone or buy it off of SUPER BRIGHT LEDS home

 

Make sure if you are running any LEDs that you get an EP27 for LEDs. There is a difference, I found out the hard way.

 

i just zip tied them to the header panel, with electrical tape covering them so i dont have a light show going on...heres a pic

 

when i did mine i zip tied them behind the grill and put some green bulbs in them (green truck) and no one ever noticed they were even in there cause the color was so dark