Regular bed measurements
Dude thats like the easiest dimension to get ever. especially since inside length is probably same on both beds.
Styleside 6ft Styleside 7ft Styleside 6ft
4x2 4x4 4x2 4x4 4x2 4x4
EXTERIOR
Wheelbase 111.5 111.5 117.5 117.5 125.7 125.7
Overall length 188.5 188.5 200.5 200.5 202.7 202.7
Overall width 66.2 68.3 66.2 68.1 66.3 69.4
Overall height 69.4 70.3 69.4 70.3 69.4 70.3
Track width, front 58.5 58.5 58.5 58.5 58.5 58.5
Track width, rear 57.3 57.3 57.3 57.3 57.3 57.3
Cargo box length 72.3 72.3 72.3 72.3 72.3 72.3
Width (max) between wheels 40.4 40.4 40.4 40.4 40.4 40.4
Inside Box Height 16.5 16.5 16.5 16.5 16.5 16.5
4x2 4x4 4x2 4x4 4x2 4x4
EXTERIOR
Wheelbase 111.5 111.5 117.5 117.5 125.7 125.7
Overall length 188.5 188.5 200.5 200.5 202.7 202.7
Overall width 66.2 68.3 66.2 68.1 66.3 69.4
Overall height 69.4 70.3 69.4 70.3 69.4 70.3
Track width, front 58.5 58.5 58.5 58.5 58.5 58.5
Track width, rear 57.3 57.3 57.3 57.3 57.3 57.3
Cargo box length 72.3 72.3 72.3 72.3 72.3 72.3
Width (max) between wheels 40.4 40.4 40.4 40.4 40.4 40.4
Inside Box Height 16.5 16.5 16.5 16.5 16.5 16.5
yeah I just needed width and length. Its not for my truck dont worry. I was trying to see how close the styleside bed is to my mazdas bed. for tonneau cover reasons
so like 54x72 or so? is that what I'm finding
so like 54x72 or so? is that what I'm finding
It's like a half inch to one inch shorter on the inside. I have put a 6 foot ladder in there before and the tailgate was a little hard to close, but not bad.
Member
Joined: Jul 2008
Posts: 1,040
Likes: 1
From: Taft, Ca
Mazda bed's has the same inside dimensions and uses the same tailgate as the styleside only difference is the bedsides are stamped differnt my lebra tonneau cover siad on the box it would fit ford rangers and mazda b-series
newer B-series I think though. I gota go measure but I'm pretty sure my 91 is a bit different. I was just hoping to mod a ranger one to fit or maybe its fits. Cause they are way easier to find on craigslist etc.
well i got around to measuring the bed and its 57" wide by 74" so its quite a bit wider and just a tad longer. But I'm thinking maybe I can mod a Ranger one to work by making somthing extended an inch or so off the rails.
so i think I found that will work. Its a on-the-rail style cover and its 60x75. which would sit right on top of my box. its local for $100 i think i might get it
so i think I found that will work. Its a on-the-rail style cover and its 60x75. which would sit right on top of my box. its local for $100 i think i might get it
Last edited by INT3RC3PTOR; Sep 6, 2009 at 04:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Trade: Who wants to trade beds? Black stepside for regular bed - IN
ChargerOnDavins
OLD - Interior, Exterior, Electrical, & Misc.
36
Jun 4, 2011 07:05 PM
Want to Buy: stepside cap OR maybe trade for regular bed -Ohio
sullys_ranger
OLD - Interior, Exterior, Electrical, & Misc.
2
Jan 14, 2011 02:39 AM
Want to Trade: stepside for regular bed (PA area)
joshc697
OLD - Interior, Exterior, Electrical, & Misc.
2
Dec 22, 2010 05:45 PM
sullys_ranger
General Ford Ranger Discussion
19
Dec 1, 2010 08:20 AM
