Exterior Semi-Tech General discussion of exterior for the Ford Ranger.
Sponsored by:
Sponsored by: CARiD

Tail Lights Finally Nightshaded and Led Bulbs put in.

Old Aug 2, 2009
  #1  
effexfour's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Mar 2009
Posts: 866
Likes: 1
From: Edmonton, Alberta, Canada
Tail Lights Finally Nightshaded and Led Bulbs put in.

Did my 3'rd brake light months ago but have been too busy and out of town for a while so the tails never got done. I threw in an old cracked pair off my rolled parts truck and did mine over a few coffee breaks at work. They had a nasty scratch on them from a bike pedal i think so i had to sand that out, and sanded down all the little circles in them from the mould and brought them down to 1000 grit, then scrubbed them with blending paste and a yellow brillo. Masked the clear section, sprayed 2 coats of nightshade (did not want them super dark) then took the masking off the clear parts, scrubbed them with a yellow brillo and blending paste again had them clearcoated by one of the painters. I think they came out good, they are exactly as dark as i was aiming for and came out nice and glossy. I got my superbrightled order as well, put in my tail bulbs but havnt had a chance go get any night shots.
Name:  DSCN2891.jpg
Views: 159
Size:  107.6 KB Name:  DSCN2895.jpg
Views: 102
Size:  153.0 KBName:  DSCN2893.jpg
Views: 118
Size:  98.5 KB
 
Reply
Old Aug 2, 2009
  #2  
rstangboi's Avatar
Member
Joined: Jan 2008
Posts: 2,583
Likes: 0
From: Davis, Ca
that looks great! not too dark but still noticeable! love it
 
Reply
Old Aug 2, 2009
  #3  
crucialcolin's Avatar
Member
Joined: May 2008
Posts: 257
Likes: 0
From: Roseville, CA
Not to be a downer or anything but I would have recommended going with OSRAM Sylvania L1224R LED tails. Best bulbs you can get :)
* JP7 on these forums might still have a few...

I see a problem with the bulb you got right off the bat as it wont properly use the reflector in your tail light housing thus it wont be very bright. L1224Rs do an excellent job of this.
 

Last edited by crucialcolin; Aug 2, 2009 at 02:31 AM.
Reply
Old Aug 2, 2009
  #4  
effexfour's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Mar 2009
Posts: 866
Likes: 1
From: Edmonton, Alberta, Canada
Originally Posted by crucialcolin
Not to be a downer or anything but I would have recommended going with OSRAM Sylvania L1224R LED tails. Best bulbs you can get :)
* JP7 on these forums might still have a few...

I see a problem with the bulb you got right off the bat as it wont properly use the reflector in your tail light housing thus it wont be very bright. L1224Rs do an excellent job of this.
I agree, they are not quite as bright as a regular bulb, I just bought a few to see how they were when I ordered the leds for my console and dash. They do have a few on the backside that shine back the reflector but they do look more like red spots than the whole lens lighting up. I might check into those other ones, thanks!
 
Reply
Old Aug 2, 2009
  #5  
RangerNDog's Avatar
Member
iTrader: (10)
Joined: Aug 2008
Posts: 1,958
Likes: 2
From: Harrisonburg, VA
Those tails look great. One day I will get around to doing my tails and that is the exact color I want.
 
Reply
Old Aug 2, 2009
  #6  
seed60's Avatar
RF Veteran
iTrader: (15)
Joined: Jun 2008
Posts: 5,584
Likes: 0
From: Mooresville, NC
Nice job on the tails. They look great.
 
Reply
Old Aug 2, 2009
  #7  
Trigger01's Avatar
RF Veteran
iTrader: (2)
Joined: Oct 2005
Posts: 18,788
Likes: 4
From: Knoxville, TN
Some of the best looking nightshaded tails I have ever seen. Not to dark, just right. you get a big thumbs up from me.
 
Reply
Old Aug 2, 2009
  #8  
effexfour's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Mar 2009
Posts: 866
Likes: 1
From: Edmonton, Alberta, Canada
^^
Thanks! Every time i do it it looks a little better. I am surprised at how well I managed to hide the scratches in it. Only problem is i have everybody who sees them bugging me to do theirs. haha
 
Reply
Old Aug 2, 2009
  #9  
ATOM's Avatar
Member
iTrader: (2)
Joined: Jun 2005
Posts: 212
Likes: 0
From: WI
those look perfect
 
Reply
Old Aug 2, 2009
  #10  
crucialcolin's Avatar
Member
Joined: May 2008
Posts: 257
Likes: 0
From: Roseville, CA
Yeah I must say that is a good looking nightshade job. I'm not usually a fan of nightshade tails or headlamps but those turned out perfect on your truck.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2004xlmiller
OLD - Interior, Exterior, Electrical, & Misc.
8
Aug 28, 2012 01:00 PM
djfllmn
Snapshots
34
Oct 17, 2011 05:39 PM
imprezu
OLD - Interior, Exterior, Electrical, & Misc.
1
Oct 13, 2010 08:09 PM
GI_JO_NATHAN
OLD - Interior, Exterior, Electrical, & Misc.
3
Aug 27, 2010 11:01 PM
Masteratarms93
OLD - Interior, Exterior, Electrical, & Misc.
0
Jul 19, 2010 11:29 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 11:09 AM.