Hi, I own a 1998 Ford Ranger. I need to replace my windshield washer nozzles, but I am not sure how to reach the passenger side one from under the hood. If you know how to do this or have any helpful links, it would be greatly appreciated. Thanks

 

If you are replacing it, dont worry too much about breaking it. Get a small screwdriver and a rag. Fold the rag up and lay it underneath the screwdriver so you dont scratch the hood. Pry up on the nozzle and it should snap out.

 

Thanks for the response. I forgot to mention that I will be running LED lights from them. So I am unable to locate that one nozzle from under the hood in order to run the wires.

 

use the hose coming off of it to fish the wire through. tie the wire to the hose once you remove the nozzle and pull it through, but tie another wire to the hose as well so you can fish the hose back up in there.