Big04Ranger's SAS Thread
#1
Big04Ranger's SAS Thread
well it has been started.. heres whats gonna be used
Rear
Procomp 5.5" chevy leafs(installed)
Chevy Shackles (installed)
Front
79 HP Dana 44 narrowed 6"(in garage)
BcBroncos 6.5"+winch coils(garage)
Cage Offroad Tube Arms (Garage)
PSC 1 Ton Steering kit (garage)
Yota Box(sittin in garage)
Odds and Ends that still need to be bought
front brakes
513s
shocks
Electric Lockers when i can afford them
and what ever else i run into..lol
PSC 1 ton Steering Coils Cage Tube Arms
Rear
Procomp 5.5" chevy leafs(installed)
Chevy Shackles (installed)
Front
79 HP Dana 44 narrowed 6"(in garage)
BcBroncos 6.5"+winch coils(garage)
Cage Offroad Tube Arms (Garage)
PSC 1 Ton Steering kit (garage)
Yota Box(sittin in garage)
Odds and Ends that still need to be bought
front brakes
513s
shocks
Electric Lockers when i can afford them
and what ever else i run into..lol
PSC 1 ton Steering Coils Cage Tube Arms
Last edited by Big04Ranger; 02-24-2007 at 02:51 PM.
#2
well here is what i got done so far tonight. after i conned my mom into letting me have some garage space.
removed leafs in prep for the chevy springs. im very limited on space at the moment so i can only work on one end of the truck at a time.
some random other pics
Zabeard's sploder diff on the left.. my HP 44 can kinda be seen to the right
Race Tires so i can get out of the garage..lol
removed leafs in prep for the chevy springs. im very limited on space at the moment so i can only work on one end of the truck at a time.
some random other pics
Zabeard's sploder diff on the left.. my HP 44 can kinda be seen to the right
Race Tires so i can get out of the garage..lol
#4
Good luck with the Build the Cage arms are BEEF though I seen alot of the used on FS Broncos. They will take a trashing. If you have't picked your springs I like these ones
http://broncograveyard.com/bronco/i-...ils_4_inch.htm
this sight is also good for the D44 Parts as wells as buckets and hardware for the springs
http://broncograveyard.com/bronco/i-...8-79__pair.htm
http://broncograveyard.com/bronco/i-...ils_4_inch.htm
this sight is also good for the D44 Parts as wells as buckets and hardware for the springs
http://broncograveyard.com/bronco/i-...8-79__pair.htm
#6
#9
Originally Posted by Rangerless
Good luck with the Build the Cage arms are BEEF though I seen alot of the used on FS Broncos. They will take a trashing. If you have't picked your springs I like these ones
http://broncograveyard.com/bronco/i-...ils_4_inch.htm
this sight is also good for the D44 Parts as wells as buckets and hardware for the springs
http://broncograveyard.com/bronco/i-...8-79__pair.htm
http://broncograveyard.com/bronco/i-...ils_4_inch.htm
this sight is also good for the D44 Parts as wells as buckets and hardware for the springs
http://broncograveyard.com/bronco/i-...8-79__pair.htm
i have the stock 79 buckets and im using bcbroncos 6.5"+winch springs from an EB
#11
#12
well got some stuff done tonight but my camera is officially junk.. got the C Wedge wacked off the 44, its now ready for me to cut 6" off the tube. and i got the front spring hangers removed. now i just need to move them forward then wait for my leafs to get here.. then the rear is completely done
#20
#23
#25
Originally Posted by zabeard
you cant remove the bed? its not that hard.
knowing scott its more out of lazyness why he isnt removing his
knowing scott its more out of lazyness why he isnt removing his
btw look later tonight for the rear totally done pics.. other spring is here