I have a 97 3.0 , that’s blown up I bought a 2000 ranger with 3.0 Parts truck just wondering what all will have to be swapped to make it work, thanks for the help

 

Welcome to the forum

Assuming you mean 3.0l engine is not working in the 1997?
If so, you will remove the intake manifold and injector system from the 1997 3.0l and install these on the 2000 3.0l, this is to match the older "return style" fuel system which changed in 1998, also to match 1997 wiring connectors for sensors and controls on the intake, and EGR system if it has one

Also need a new 1997 3.0l Cam synchronizer and cam sensor to put in the 2000 3.0l, as 2000 has newer 2 wire model that won't work with the 3 wire 1997 computer
I would use a used one(from the 1997) for this

I would also replace rear crank main seal while 2000 engine is out

Optional
Redo oil pan gasket, they leak
New oil pump, because its just a good idea, lol
If oil pan is removed, replace front cover gasket(timing chain cover), these often leaked coolant

 

Thanks for the help , it’s greatly appreciated